Struct rocket_http::hyper::server::conn::Connection

impl<I, B, S, E> Connection<I, S, E>where S: HttpService<Body, ResBody = B>, <S as HttpService<Body>>::Error: Into<Box<dyn Error + Send + Sync, Global>>, I: AsyncRead + AsyncWrite + Unpin, B: Body + 'static, ::Error: Into<Box<dyn Error + Send + Sync, Global>>, E: ConnStreamExec<<S as HttpService<Body>>::Future, B>,

pub fn graceful_shutdown(self: Pin<&mut Connection<I, S, E>>)

Start a graceful shutdown process for this connection.

This Connection should continue to be polled until shutdown can finish.

Note

This should only be called while the Connection future is still pending. If called after Connection::poll has resolved, this does nothing.

pub fn into_parts(self) -> Parts<I, S>

Return the inner IO object, and additional information.

If the IO object has been “rewound” the io will not contain those bytes rewound. This should only be called after poll_without_shutdown signals that the connection is “done”. Otherwise, it may not have finished flushing all necessary HTTP bytes.

Panics

This method will panic if this connection is using an h2 protocol.

pub fn try_into_parts(self) -> Option<Parts<I, S>>

Return the inner IO object, and additional information, if available.

This method will return a None if this connection is using an h2 protocol.

pub fn poll_without_shutdown( &mut self, cx: &mut Context<'_> ) -> Poll<Result<(), Error>>

Poll the connection for completion, but without calling shutdown on the underlying IO.

This is useful to allow running a connection while doing an HTTP upgrade. Once the upgrade is completed, the connection would be “done”, but it is not desired to actually shutdown the IO object. Instead you would take it back using into_parts.

pub fn without_shutdown( self ) -> impl Future<Output = Result<Parts<I, S>, Error>>

Prevent shutdown of the underlying IO object at the end of service the request, instead run into_parts. This is a convenience wrapper over poll_without_shutdown.

Error

This errors if the underlying connection protocol is not HTTP/1.

pub fn with_upgrades(self) -> UpgradeableConnection<I, S, E>where I: Send,

Enable this connection to support higher-level HTTP upgrades.

See the upgrade module for more.

Trait Implementations§

impl<I, S> Debug for Connection<I, S, Exec>where S: HttpService<Body>,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

impl<I, B, S, E> Future for Connection<I, S, E>where S: HttpService<Body, ResBody = B>, <S as HttpService<Body>>::Error: Into<Box<dyn Error + Send + Sync, Global>>, I: AsyncRead + AsyncWrite + Unpin, B: Body + 'static, ::Error: Into<Box<dyn Error + Send + Sync, Global>>, E: ConnStreamExec<<S as HttpService<Body>>::Future, B>,

type Output = Result<(), Error>

The type of value produced on completion.

fn poll( self: Pin<&mut Connection<I, S, E>>, cx: &mut Context<'_> ) -> Poll<<Connection<I, S, E> as Future>::Output>

Attempt to resolve the future to a final value, registering the current task for wakeup if the value is not yet available. Read more

impl<'pin, T, S, E> Unpin for Connection<T, S, E>where Origin<'__pin, T, S, E>: Unpin, S: HttpService<Body>,

Auto Trait Implementations§

impl<T, S, E = Exec> !RefUnwindSafe for Connection<T, S, E>

impl<T, S, E> Send for Connection<T, S, E>where E: Send, S: Send, T: Send, <<S as HttpService<Body>>::ResBody as Body>::Data: Send, <S as HttpService<Body>>::Future: Send, <S as HttpService<Body>>::ResBody: Send,

impl<T, S, E> Sync for Connection<T, S, E>where E: Sync, S: Sync, T: Sync, <<S as HttpService<Body>>::ResBody as Body>::Data: Send + Sync, <S as HttpService<Body>>::Future: Sync, <S as HttpService<Body>>::ResBody: Sync,

impl<T, S, E = Exec> !UnwindSafe for Connection<T, S, E>

Blanket Implementations§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> FutureExt for Twhere T: Future + ?Sized,

fn map<U, F>(self, f: F) -> Map<Self, F>where F: FnOnce(Self::Output) -> U, Self: Sized,

Map this future’s output to a different type, returning a new future of the resulting type. Read more

fn map_into(self) -> MapInto<Self, U>where Self::Output: Into, Self: Sized,

Map this future’s output to a different type, returning a new future of the resulting type. Read more

fn then<Fut, F>(self, f: F) -> Then<Self, Fut, F>where F: FnOnce(Self::Output) -> Fut, Fut: Future, Self: Sized,

Chain on a computation for when a future finished, passing the result of the future to the provided closure f. Read more

fn left_future(self) -> Either<Self, B>where B: Future<Output = Self::Output>, Self: Sized,

Wrap this future in an Either future, making it the left-hand variant of that Either. Read more

fn right_future<A>(self) -> Either<A, Self>where A: Future<Output = Self::Output>, Self: Sized,

Wrap this future in an Either future, making it the right-hand variant of that Either. Read more

fn into_stream(self) -> IntoStream<Self>where Self: Sized,

Convert this future into a single element stream. Read more

fn flatten(self) -> Flatten<Self>where Self::Output: Future, Self: Sized,

Flatten the execution of this future when the output of this future is itself another future. Read more

fn flatten_stream(self) -> FlattenStream<Self>where Self::Output: Stream, Self: Sized,

Flatten the execution of this future when the successful result of this future is a stream. Read more

fn fuse(self) -> Fuse<Self>where Self: Sized,

Fuse a future such that poll will never again be called once it has completed. This method can be used to turn any Future into a FusedFuture. Read more

fn inspect<F>(self, f: F) -> Inspect<Self, F>where F: FnOnce(&Self::Output), Self: Sized,

Do something with the output of a future before passing it on. Read more

fn catch_unwind(self) -> CatchUnwind<Self>where Self: Sized + UnwindSafe,

Catches unwinding panics while polling the future. Read more

fn shared(self) -> Shared<Self>where Self: Sized, Self::Output: Clone,

Create a cloneable handle to this future where all handles will resolve to the same result. Read more

fn remote_handle(self) -> (Remote<Self>, RemoteHandle<Self::Output>)where Self: Sized,

Turn this future into a future that yields () on completion and sends its output to another future on a separate task. Read more

fn boxed<'a>( self ) -> Pin<Box<dyn Future<Output = Self::Output> + Send + 'a, Global>>where Self: Sized + Send + 'a,

Wrap the future in a Box, pinning it. Read more

fn boxed_local<'a>( self ) -> Pin<Box<dyn Future<Output = Self::Output> + 'a, Global>>where Self: Sized + 'a,

Wrap the future in a Box, pinning it. Read more

fn unit_error(self) -> UnitError<Self>where Self: Sized,

Turns a Future<Output = T> into a TryFuture<Ok = T, Error = ()>.

fn never_error(self) -> NeverError<Self>where Self: Sized,

Turns a Future<Output = T> into a TryFuture<Ok = T, Error = Never>.

fn poll_unpin(&mut self, cx: &mut Context<'_>) -> Poll<Self::Output>where Self: Unpin,

A convenience for calling Future::poll on Unpin future types.

fn now_or_never(self) -> Option<Self::Output>where Self: Sized,

Evaluates and consumes the future, returning the resulting output if the future is ready after the first call to Future::poll. Read more

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for Twhere U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoCollection<T> for T

fn into_collection<A>(self) -> SmallVec<A>where A: Array<Item = T>,

Converts self into a collection.

fn mapped<U, F, A>(self, f: F) -> SmallVec<A>where F: FnMut(T) -> U, A: Array<Item = U>,

impl<F> IntoFuture for Fwhere F: Future,

type Output = <F as Future>::Output

The output that the future will produce on completion.

type IntoFuture = F

Which kind of future are we turning this into?

fn into_future(self) -> <F as IntoFuture>::IntoFuture

Creates a future from a value. Read more

impl<T> Paint for Twhere T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to Color::Primary.

Example

println!("{}", value.primary());

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to Color::Fixed.

Example

println!("{}", value.fixed(color));

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to Color::Rgb.

Example

println!("{}", value.rgb(r, g, b));

fn black(&self) -> Painted<&T>

Returns self with the fg() set to Color::Black.

Example

println!("{}", value.black());

fn red(&self) -> Painted<&T>

Returns self with the fg() set to Color::Red.

Example

println!("{}", value.red());

fn green(&self) -> Painted<&T>

Returns self with the fg() set to Color::Green.

Example

println!("{}", value.green());

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::Yellow.

Example

println!("{}", value.yellow());

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::Blue.

Example

println!("{}", value.blue());

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::Magenta.

Example

println!("{}", value.magenta());

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::Cyan.

Example

println!("{}", value.cyan());

fn white(&self) -> Painted<&T>

Returns self with the fg() set to Color::White.

Example

println!("{}", value.white());

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlack.

Example

println!("{}", value.bright_black());

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightRed.

Example

println!("{}", value.bright_red());

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightGreen.

Example

println!("{}", value.bright_green());

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightYellow.

Example

println!("{}", value.bright_yellow());

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlue.

Example

println!("{}", value.bright_blue());

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightMagenta.

Example

println!("{}", value.bright_magenta());

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightCyan.

Example

println!("{}", value.bright_cyan());

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightWhite.

Example

println!("{}", value.bright_white());

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to Color::Primary.

Example

println!("{}", value.on_primary());

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to Color::Fixed.

Example

println!("{}", value.on_fixed(color));

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to Color::Rgb.

Example

println!("{}", value.on_rgb(r, g, b));

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::Black.

Example

println!("{}", value.on_black());

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::Red.

Example

println!("{}", value.on_red());

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::Green.

Example

println!("{}", value.on_green());

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::Yellow.

Example

println!("{}", value.on_yellow());

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::Blue.

Example

println!("{}", value.on_blue());

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::Magenta.

Example

println!("{}", value.on_magenta());

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::Cyan.

Example

println!("{}", value.on_cyan());

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::White.

Example

println!("{}", value.on_white());

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlack.

Example

println!("{}", value.on_bright_black());

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightRed.

Example

println!("{}", value.on_bright_red());

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightGreen.

Example

println!("{}", value.on_bright_green());

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightYellow.

Example

println!("{}", value.on_bright_yellow());

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlue.

Example

println!("{}", value.on_bright_blue());

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightMagenta.

Example

println!("{}", value.on_bright_magenta());

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightCyan.

Example

println!("{}", value.on_bright_cyan());

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightWhite.

Example

println!("{}", value.on_bright_white());

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Bold.

Example

println!("{}", value.bold());

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Dim.

Example

println!("{}", value.dim());

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Italic.

Example

println!("{}", value.italic());

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Underline.

Example

println!("{}", value.underline());

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Blink.

Example

println!("{}", value.blink());

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::RapidBlink.

Example

println!("{}", value.rapid_blink());

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Invert.

Example

println!("{}", value.invert());

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Conceal.

Example

println!("{}", value.conceal());

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Strike.

Example

println!("{}", value.strike());

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Mask.

Example

println!("{}", value.mask());

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Wrap.

Example

println!("{}", value.wrap());

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Linger.

Example

println!("{}", value.linger());

fn clear(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Clear.

Example

println!("{}", value.clear());

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Bright.

Example

println!("{}", value.bright());

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::OnBright.

Example

println!("{}", value.on_bright());

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

fn new(self) -> Painted<Self>where Self: Sized,

Create a new Painted with a default Style. Read more

fn paint<S>(&self, style: S) -> Painted<&Self>where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

impl<T> Same<T> for T

type Output = T

Should always be Self

impl<T, U> TryFrom for Twhere U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<F, T, E> TryFuture for Fwhere F: Future<Output = Result<T, E>> + ?Sized,

type Ok = T

The type of successful values yielded by this future

type Error = E

The type of failures yielded by this future

fn try_poll( self: Pin<&mut F>, cx: &mut Context<'_> ) -> Poll<<F as Future>::Output>

Poll this TryFuture as if it were a Future. Read more

impl<Fut> TryFutureExt for Futwhere Fut: TryFuture + ?Sized,

fn flatten_sink<Item>(self) -> FlattenSink<Self, Self::Ok>where Self::Ok: Sink<Item, Error = Self::Error>, Self: Sized,

Flattens the execution of this future when the successful result of this future is a Sink. Read more

fn map_ok<T, F>(self, f: F) -> MapOk<Self, F>where F: FnOnce(Self::Ok) -> T, Self: Sized,

Maps this future’s success value to a different value. Read more

fn map_ok_or_else<T, E, F>(self, e: E, f: F) -> MapOkOrElse<Self, F, E>where F: FnOnce(Self::Ok) -> T, E: FnOnce(Self::Error) -> T, Self: Sized,

Maps this future’s success value to a different value, and permits for error handling resulting in the same type. Read more

fn map_err<E, F>(self, f: F) -> MapErr<Self, F>where F: FnOnce(Self::Error) -> E, Self: Sized,

Maps this future’s error value to a different value. Read more

fn err_into<E>(self) -> ErrInto<Self, E>where Self: Sized, Self::Error: Into<E>,

Maps this future’s Error to a new error type using the Into trait. Read more

fn ok_into(self) -> OkInto<Self, U>where Self: Sized, Self::Ok: Into,

Maps this future’s Ok to a new type using the Into trait.

fn and_then<Fut, F>(self, f: F) -> AndThen<Self, Fut, F>where F: FnOnce(Self::Ok) -> Fut, Fut: TryFuture<Error = Self::Error>, Self: Sized,

Executes another future after this one resolves successfully. The success value is passed to a closure to create this subsequent future. Read more

fn or_else<Fut, F>(self, f: F) -> OrElse<Self, Fut, F>where F: FnOnce(Self::Error) -> Fut, Fut: TryFuture<Ok = Self::Ok>, Self: Sized,

Executes another future if this one resolves to an error. The error value is passed to a closure to create this subsequent future. Read more

fn inspect_ok<F>(self, f: F) -> InspectOk<Self, F>where F: FnOnce(&Self::Ok), Self: Sized,

Do something with the success value of a future before passing it on. Read more

fn inspect_err<F>(self, f: F) -> InspectErr<Self, F>where F: FnOnce(&Self::Error), Self: Sized,

Do something with the error value of a future before passing it on. Read more

fn try_flatten(self) -> TryFlatten<Self, Self::Ok>where Self::Ok: TryFuture<Error = Self::Error>, Self: Sized,

Flatten the execution of this future when the successful result of this future is another future. Read more

fn try_flatten_stream(self) -> TryFlattenStream<Self>where Self::Ok: TryStream<Error = Self::Error>, Self: Sized,

Flatten the execution of this future when the successful result of this future is a stream. Read more

fn unwrap_or_else<F>(self, f: F) -> UnwrapOrElse<Self, F>where Self: Sized, F: FnOnce(Self::Error) -> Self::Ok,

Unwraps this future’s output, producing a future with this future’s Ok type as its Output type. Read more

fn into_future(self) -> IntoFuture<Self>where Self: Sized,

Wraps a TryFuture into a type that implements Future. Read more

fn try_poll_unpin( &mut self, cx: &mut Context<'_> ) -> Poll<Result<Self::Ok, Self::Error>>where Self: Unpin,

A convenience method for calling TryFuture::try_poll on Unpin future types.

impl<T, U> TryInto for Twhere U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more