Struct rocket_db_pools::Connection
source · pub struct Connection<D: Database>(/* private fields */);Expand description
A request guard which retrieves a single connection to a Database.
For a database type of Db, a request guard of Connection<Db> retrieves a
single connection to Db.
The request guard succeeds if the database was initialized by the
Initializer fairing and a connection is available within
connect_timeout seconds.
- If the
Initializerfairing was not attached, the guard fails with statusInternalServerError. ASentinelguards this condition, and so this type of failure is unlikely to occur. ANoneerror is returned. - If a connection is not available within
connect_timeoutseconds or another error occurs, the guard fails with statusServiceUnavailableand the error is returned inSome.
Deref
A type of Connection<Db> dereferences, mutably and immutably, to the
native database connection type. The driver table
lists the concrete native Deref types.
Example
use rocket_db_pools::{Database, Connection};
#[derive(Database)]
#[database("db")]
struct Db(Pool);
#[get("/")]
async fn db_op(db: Connection<Db>) {
// use `&*db` to get an immutable borrow to the native connection type
// use `&mut *db` to get a mutable borrow to the native connection type
}Implementations§
source§impl<D: Database> Connection<D>
impl<D: Database> Connection<D>
sourcepub fn into_inner(self) -> <D::Pool as Pool>::Connection
pub fn into_inner(self) -> <D::Pool as Pool>::Connection
Returns the internal connection value. See the Connection Deref
column for the expected type of this value.
Note that Connection<D> derefs to the internal connection type, so
using this method is likely unnecessary. See deref
for examples.
Example
use rocket_db_pools::{Database, Connection};
#[derive(Database)]
#[database("db")]
struct Db(Pool);
#[get("/")]
async fn db_op(db: Connection<Db>) {
let inner = db.into_inner();
}Trait Implementations§
source§impl<D: Database> Deref for Connection<D>
impl<D: Database> Deref for Connection<D>
source§impl<D: Database> DerefMut for Connection<D>
impl<D: Database> DerefMut for Connection<D>
Auto Trait Implementations§
impl<D> RefUnwindSafe for Connection<D>where <<D as Database>::Pool as Pool>::Connection: RefUnwindSafe,
impl<D> Send for Connection<D>where <<D as Database>::Pool as Pool>::Connection: Send,
impl<D> Sync for Connection<D>where <<D as Database>::Pool as Pool>::Connection: Sync,
impl<D> Unpin for Connection<D>where <<D as Database>::Pool as Pool>::Connection: Unpin,
impl<D> UnwindSafe for Connection<D>where <<D as Database>::Pool as Pool>::Connection: UnwindSafe,
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T> IntoCollection<T> for T
impl<T> IntoCollection<T> for T
source§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere T: ?Sized,
source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
Example
println!("{}", value.bright_yellow());source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
Example
println!("{}", value.bright_magenta());source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
Example
println!("{}", value.on_bright_black());source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
Example
println!("{}", value.on_bright_green());source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
Example
println!("{}", value.on_bright_yellow());source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
Example
println!("{}", value.on_bright_blue());source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
Example
println!("{}", value.on_bright_magenta());source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
Example
println!("{}", value.on_bright_cyan());source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
Example
println!("{}", value.on_bright_white());source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
Example
println!("{}", value.underline());source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
Example
println!("{}", value.rapid_blink());source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);