pub struct Flash<R> { /* private fields */ }
Expand description
Sets a “flash” cookie that will be removed when it is accessed. The
analogous request type is FlashMessage
.
This type makes it easy to send messages across requests. It is typically used for “status” messages after redirects. For instance, if a user attempts to visit a page he/she does not have access to, you may want to redirect the user to a safe place and show a message indicating what happened on the redirected page. The message should only persist for a single request. This can be accomplished with this type.
Usage
Each Flash
message consists of a kind
and message
. A generic
constructor (new) can be used to construct a message of any
kind, while the warning, success, and
error constructors create messages with the corresponding
kinds.
Messages can be retrieved on the request side via the FlashMessage
type
and the kind and message methods.
Response
The Responder
implementation for Flash
sets the message cookie and then
uses the passed in responder res
to complete the response. In other words,
it simply sets a cookie and delegates the rest of the response handling to
the wrapped responder.
Example
The following routes illustrate the use of a Flash
message on both the
request and response sides.
use rocket::response::{Flash, Redirect};
use rocket::request::FlashMessage;
#[post("/login/<name>")]
fn login(name: &str) -> Result<&'static str, Flash<Redirect>> {
if name == "special_user" {
Ok("Hello, special user!")
} else {
Err(Flash::error(Redirect::to(uri!(index)), "Invalid username."))
}
}
#[get("/")]
fn index(flash: Option<FlashMessage<'_>>) -> String {
flash.map(|flash| format!("{}: {}", flash.kind(), flash.message()))
.unwrap_or_else(|| "Welcome!".to_string())
}
On the response side (in login
), a Flash
error message is set if some
fictional authentication failed, and the user is redirected to "/"
. On the
request side (in index
), the handler emits the flash message if there is
one and otherwise emits a standard welcome message. Note that if the user
were to refresh the index page after viewing a flash message, the user would
receive the standard welcome message.
Implementations§
source§impl<R> Flash<R>
impl<R> Flash<R>
sourcepub fn new<K: Into<String>, M: Into<String>>(
res: R,
kind: K,
message: M
) -> Flash<R>
pub fn new<K: Into<String>, M: Into<String>>( res: R, kind: K, message: M ) -> Flash<R>
Constructs a new Flash
message with the given kind
, message
, and
underlying responder
.
Examples
Construct a “suggestion” message with contents “Try this out!” that redirects to “/”.
use rocket::response::{Redirect, Flash};
let message = Flash::new(Redirect::to("/"), "suggestion", "Try this out!");
sourcepub fn success<S: Into<String>>(responder: R, message: S) -> Flash<R>
pub fn success<S: Into<String>>(responder: R, message: S) -> Flash<R>
Constructs a “success” Flash
message with the given responder
and
message
.
Examples
Construct a “success” message with contents “It worked!” that redirects to “/”.
use rocket::response::{Redirect, Flash};
let message = Flash::success(Redirect::to("/"), "It worked!");
sourcepub fn warning<S: Into<String>>(responder: R, message: S) -> Flash<R>
pub fn warning<S: Into<String>>(responder: R, message: S) -> Flash<R>
Constructs a “warning” Flash
message with the given responder
and
message
.
Examples
Construct a “warning” message with contents “Watch out!” that redirects to “/”.
use rocket::response::{Redirect, Flash};
let message = Flash::warning(Redirect::to("/"), "Watch out!");
sourcepub fn error<S: Into<String>>(responder: R, message: S) -> Flash<R>
pub fn error<S: Into<String>>(responder: R, message: S) -> Flash<R>
Constructs an “error” Flash
message with the given responder
and
message
.
Examples
Construct an “error” message with contents “Whoops!” that redirects to “/”.
use rocket::response::{Redirect, Flash};
let message = Flash::error(Redirect::to("/"), "Whoops!");
Trait Implementations§
source§impl<'r, 'o: 'r, R: Responder<'r, 'o>> Responder<'r, 'o> for Flash<R>
impl<'r, 'o: 'r, R: Responder<'r, 'o>> Responder<'r, 'o> for Flash<R>
Sets the message cookie and then uses the wrapped responder to complete the
response. In other words, simply sets a cookie and delegates the rest of the
response handling to the wrapped responder. As a result, the Outcome
of
the response is the Outcome
of the wrapped Responder
.
Auto Trait Implementations§
impl<R> RefUnwindSafe for Flash<R>where R: RefUnwindSafe,
impl<R> Send for Flash<R>where R: Send,
impl<R> Sync for Flash<R>where R: Sync,
impl<R> Unpin for Flash<R>where R: Unpin,
impl<R> UnwindSafe for Flash<R>where R: UnwindSafe,
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T> IntoCollection<T> for T
impl<T> IntoCollection<T> for T
source§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere T: ?Sized,
source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightYellow
.
Example
println!("{}", value.bright_yellow());
source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightMagenta
.
Example
println!("{}", value.bright_magenta());
source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightBlack
.
Example
println!("{}", value.on_bright_black());
source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightGreen
.
Example
println!("{}", value.on_bright_green());
source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightYellow
.
Example
println!("{}", value.on_bright_yellow());
source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightBlue
.
Example
println!("{}", value.on_bright_blue());
source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightMagenta
.
Example
println!("{}", value.on_bright_magenta());
source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightCyan
.
Example
println!("{}", value.on_bright_cyan());
source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightWhite
.
Example
println!("{}", value.on_bright_white());
source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self
with the
attr()
set to
Attribute::Underline
.
Example
println!("{}", value.underline());
source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self
with the
attr()
set to
Attribute::RapidBlink
.
Example
println!("{}", value.rapid_blink());
source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);