Enum rocket::error::ErrorKind

source ·
#[non_exhaustive]
pub enum ErrorKind { Bind(Error), Io(Error), Config(Error), Collisions(Collisions), FailedFairings(Vec<Info>), SentinelAborts(Vec<Sentry>), InsecureSecretKey(Profile), Shutdown(Arc<Rocket<Orbit>>, Option<Box<dyn StdError + Send + Sync>>), }
Expand description

The kind error that occurred.

In almost every instance, a launch error occurs because of an I/O error; this is represented by the Io variant. A launch error may also occur because of ill-defined routes that lead to collisions or because a fairing encountered an error; these are represented by the Collision and FailedFairing variants, respectively.

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

Bind(Error)

Binding to the provided address/port failed.

§

Io(Error)

An I/O error occurred during launch.

§

Config(Error)

A valid Config could not be extracted from the configured figment.

§

Collisions(Collisions)

Route collisions were detected.

§

FailedFairings(Vec<Info>)

Launch fairing(s) failed.

§

SentinelAborts(Vec<Sentry>)

Sentinels requested abort.

§

InsecureSecretKey(Profile)

The configuration profile is not debug but not secret key is configured.

§

Shutdown(Arc<Rocket<Orbit>>, Option<Box<dyn StdError + Send + Sync>>)

Tuple Fields

§0: Arc<Rocket<Orbit>>

The instance of Rocket that failed to shutdown.

§1: Option<Box<dyn StdError + Send + Sync>>

The error that occurred during shutdown, if any.

Shutdown failed.

Trait Implementations§

source§

impl Debug for ErrorKind

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Display for ErrorKind

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl From<ErrorKind> for Error

source§

fn from(kind: ErrorKind) -> Self

Converts to this type from the input type.

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoCollection<T> for T

source§

fn into_collection<A>(self) -> SmallVec<A>where A: Array<Item = T>,

Converts self into a collection.
source§

fn mapped<U, F, A>(self, f: F) -> SmallVec<A>where F: FnMut(T) -> U, A: Array<Item = U>,

source§

impl<T> Paint for Twhere T: ?Sized,

source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to Color::Primary.

Example
println!("{}", value.primary());
source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to Color::Fixed.

Example
println!("{}", value.fixed(color));
source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to Color::Rgb.

Example
println!("{}", value.rgb(r, g, b));
source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to Color::Black.

Example
println!("{}", value.black());
source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to Color::Red.

Example
println!("{}", value.red());
source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to Color::Green.

Example
println!("{}", value.green());
source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::Yellow.

Example
println!("{}", value.yellow());
source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::Blue.

Example
println!("{}", value.blue());
source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::Magenta.

Example
println!("{}", value.magenta());
source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::Cyan.

Example
println!("{}", value.cyan());
source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to Color::White.

Example
println!("{}", value.white());
source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlack.

Example
println!("{}", value.bright_black());
source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightRed.

Example
println!("{}", value.bright_red());
source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightGreen.

Example
println!("{}", value.bright_green());
source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightYellow.

Example
println!("{}", value.bright_yellow());
source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlue.

Example
println!("{}", value.bright_blue());
source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightMagenta.

Example
println!("{}", value.bright_magenta());
source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightCyan.

Example
println!("{}", value.bright_cyan());
source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightWhite.

Example
println!("{}", value.bright_white());
source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to Color::Primary.

Example
println!("{}", value.on_primary());
source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to Color::Fixed.

Example
println!("{}", value.on_fixed(color));
source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to Color::Rgb.

Example
println!("{}", value.on_rgb(r, g, b));
source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::Black.

Example
println!("{}", value.on_black());
source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::Red.

Example
println!("{}", value.on_red());
source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::Green.

Example
println!("{}", value.on_green());
source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::Yellow.

Example
println!("{}", value.on_yellow());
source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::Blue.

Example
println!("{}", value.on_blue());
source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::Magenta.

Example
println!("{}", value.on_magenta());
source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::Cyan.

Example
println!("{}", value.on_cyan());
source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::White.

Example
println!("{}", value.on_white());
source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlack.

Example
println!("{}", value.on_bright_black());
source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightRed.

Example
println!("{}", value.on_bright_red());
source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightGreen.

Example
println!("{}", value.on_bright_green());
source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightYellow.

Example
println!("{}", value.on_bright_yellow());
source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlue.

Example
println!("{}", value.on_bright_blue());
source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightMagenta.

Example
println!("{}", value.on_bright_magenta());
source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightCyan.

Example
println!("{}", value.on_bright_cyan());
source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightWhite.

Example
println!("{}", value.on_bright_white());
source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Bold.

Example
println!("{}", value.bold());
source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Dim.

Example
println!("{}", value.dim());
source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Italic.

Example
println!("{}", value.italic());
source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Underline.

Example
println!("{}", value.underline());

Returns self with the attr() set to Attribute::Blink.

Example
println!("{}", value.blink());

Returns self with the attr() set to Attribute::RapidBlink.

Example
println!("{}", value.rapid_blink());
source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Invert.

Example
println!("{}", value.invert());
source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Conceal.

Example
println!("{}", value.conceal());
source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Strike.

Example
println!("{}", value.strike());
source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Mask.

Example
println!("{}", value.mask());
source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Wrap.

Example
println!("{}", value.wrap());
source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Linger.

Example
println!("{}", value.linger());
source§

fn clear(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Clear.

Example
println!("{}", value.clear());
source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Bright.

Example
println!("{}", value.bright());
source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::OnBright.

Example
println!("{}", value.on_bright());
source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
source§

fn new(self) -> Painted<Self>where Self: Sized,

Create a new Painted with a default Style. Read more
source§

fn paint<S>(&self, style: S) -> Painted<&Self>where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
source§

impl<T> ToString for Twhere T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

source§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more