Struct figment::value::UncasedStr

#[repr(transparent)]
pub struct UncasedStr(/* private fields */);

A cost-free reference to an uncased (case-insensitive, case-preserving) ASCII string.

This is typically created from an &str as follows:

use uncased::UncasedStr;

let ascii_ref: &UncasedStr = "Hello, world!".into();

Implementations

impl UncasedStr

pub const fn new(string: &str) -> &UncasedStr

Cost-free conversion from an &str reference to an UncasedStr.

This is a const fn on Rust 1.56+.

Example

use uncased::UncasedStr;

let uncased_str = UncasedStr::new("Hello!");
assert_eq!(uncased_str, "hello!");
assert_eq!(uncased_str, "Hello!");
assert_eq!(uncased_str, "HeLLo!");

pub fn as_str(&self) -> &str

Returns self as an &str.

Example

use uncased::UncasedStr;

let uncased_str = UncasedStr::new("Hello!");
assert_eq!(uncased_str.as_str(), "Hello!");
assert_ne!(uncased_str.as_str(), "hELLo!");

pub fn len(&self) -> usize

Returns the length, in bytes, of self.

Example

use uncased::UncasedStr;

let uncased_str = UncasedStr::new("Hello!");
assert_eq!(uncased_str.len(), 6);

pub fn is_empty(&self) -> bool

Returns true if self has a length of zero bytes.

Examples

use uncased::UncasedStr;

let s = UncasedStr::new("");
assert!(s.is_empty());

let s = UncasedStr::new("not empty");
assert!(!s.is_empty());

pub fn starts_with(&self, string: &str) -> bool

Returns true if self starts with any casing of the string string; otherwise, returns false.

Example

use uncased::UncasedStr;

let uncased_str = UncasedStr::new("MoOO");
assert!(uncased_str.starts_with("moo"));
assert!(uncased_str.starts_with("MOO"));
assert!(uncased_str.starts_with("MOOO"));
assert!(!uncased_str.starts_with("boo"));

let uncased_str = UncasedStr::new("Bèe");
assert!(!uncased_str.starts_with("Be"));
assert!(uncased_str.starts_with("Bè"));
assert!(uncased_str.starts_with("Bè"));
assert!(uncased_str.starts_with("bèe"));
assert!(uncased_str.starts_with("BèE"));

pub fn into_uncased(self: Box<UncasedStr, Global>) -> Uncased<'static>

Available on crate feature alloc only.

Converts a Box<UncasedStr> into an Uncased without copying or allocating.

Example

use uncased::Uncased;

let uncased = Uncased::new("Hello!");
let boxed = uncased.clone().into_boxed_uncased();
assert_eq!(boxed.into_uncased(), uncased);

Trait Implementations

impl AsRef<[u8]> for UncasedStr

fn as_ref(&self) -> &[u8]

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<UncasedStr> for Uncased<'_>

fn as_ref(&self) -> &UncasedStr

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<str> for UncasedStr

fn as_ref(&self) -> &str

Converts this type into a shared reference of the (usually inferred) input type.

impl Borrow<UncasedStr> for Uncased<'_>

fn borrow(&self) -> &UncasedStr

Immutably borrows from an owned value.

impl Debug for UncasedStr

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<'a, 'de> Deserialize<'de> for &'a UncasedStrwhere 'de: 'a,

fn deserialize<D>( deserializer: D ) -> Result<&'a UncasedStr, <D as Deserializer<'de>>::Error>where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Display for UncasedStr

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<'a> From<&'a str> for &'a UncasedStr

fn from(string: &'a str) -> &'a UncasedStr

Converts to this type from the input type.

impl<'s, 'c> From<&'c UncasedStr> for Uncased<'s>where 'c: 's,

fn from(string: &'c UncasedStr) -> Uncased<'s>

Converts to this type from the input type.

impl Hash for UncasedStr

fn hash<H>(&self, hasher: &mut H)where H: Hasher,

Feeds this value into the given Hasher.

impl<I> Index<I> for UncasedStrwhere I: SliceIndex<str, Output = str>,

type Output = UncasedStr

The returned type after indexing.

fn index(&self, index: I) -> &<UncasedStr as Index<I>>::Output

Performs the indexing (container[index]) operation.

impl Ord for UncasedStr

fn cmp(&self, other: &UncasedStr) -> Ordering

This method returns an Ordering between self and other.

impl PartialEq<&Uncased<'_>> for UncasedStr

fn eq(&self, other: &&Uncased<'_>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<&UncasedStr> for Uncased<'_>

fn eq(&self, other: &&UncasedStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<&UncasedStr> for str

fn eq(&self, other: &&UncasedStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<&str> for UncasedStr

fn eq(&self, other: &&str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<String> for UncasedStr

fn eq(&self, other: &String) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Uncased<'_>> for &UncasedStr

fn eq(&self, other: &Uncased<'_>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Uncased<'_>> for UncasedStr

fn eq(&self, other: &Uncased<'_>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<UncasedStr> for &Uncased<'_>

fn eq(&self, other: &UncasedStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<UncasedStr> for &str

fn eq(&self, other: &UncasedStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<UncasedStr> for Uncased<'_>

fn eq(&self, other: &UncasedStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<UncasedStr> for UncasedStr

fn eq(&self, other: &UncasedStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<UncasedStr> for str

fn eq(&self, other: &UncasedStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<str> for &UncasedStr

fn eq(&self, other: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<str> for UncasedStr

fn eq(&self, other: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<&Uncased<'_>> for UncasedStr

fn partial_cmp(&self, other: &&Uncased<'_>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<&UncasedStr> for Uncased<'_>

fn partial_cmp(&self, other: &&UncasedStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<String> for UncasedStr

fn partial_cmp(&self, other: &String) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Uncased<'_>> for &UncasedStr

fn partial_cmp(&self, other: &Uncased<'_>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Uncased<'_>> for UncasedStr

fn partial_cmp(&self, other: &Uncased<'_>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<UncasedStr> for &Uncased<'_>

fn partial_cmp(&self, other: &UncasedStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<UncasedStr> for Uncased<'_>

fn partial_cmp(&self, other: &UncasedStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<UncasedStr> for UncasedStr

fn partial_cmp(&self, other: &UncasedStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<UncasedStr> for str

fn partial_cmp(&self, other: &UncasedStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<str> for UncasedStr

fn partial_cmp(&self, other: &str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> Serialize for &'a UncasedStr

fn serialize<S>( &self, serializer: S ) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error>where S: Serializer,

Serialize this value into the given Serde serializer.

impl Eq for UncasedStr