Primitive Type f16

🔬This is a nightly-only experimental API. (f16 #116909)
Expand description

A 16-bit floating-point type (specifically, the “binary16” type defined in IEEE 754-2008).

This type is very similar to f32 but has decreased precision because it uses half as many bits. Please see the documentation for f32 or Wikipedia on half-precision values for more information.

Note that most common platforms will not support f16 in hardware without enabling extra target features, with the notable exception of Apple Silicon (also known as M1, M2, etc.) processors. Hardware support on x86-64 requires the avx512fp16 feature, while RISC-V requires Zhf. Usually the fallback implementation will be to use f32 hardware if it exists, and convert between f16 and f32 when performing math.

See also the std::f16::consts module.

Implementations§

source§

impl f16

source

pub const RADIX: u32 = 2u32

🔬This is a nightly-only experimental API. (f16 #116909)

The radix or base of the internal representation of f16.

source

pub const MANTISSA_DIGITS: u32 = 11u32

🔬This is a nightly-only experimental API. (f16 #116909)

Number of significant digits in base 2.

source

pub const DIGITS: u32 = 3u32

🔬This is a nightly-only experimental API. (f16 #116909)

Approximate number of significant digits in base 10.

This is the maximum x such that any decimal number with x significant digits can be converted to f16 and back without loss.

Equal to floor(log10 2MANTISSA_DIGITS − 1).

source

pub const EPSILON: f16 = 9.7656E-4f16

🔬This is a nightly-only experimental API. (f16 #116909)

Machine epsilon value for f16.

This is the difference between 1.0 and the next larger representable number.

Equal to 21 − MANTISSA_DIGITS.

source

pub const MIN: f16 = -65504f16

🔬This is a nightly-only experimental API. (f16 #116909)

Smallest finite f16 value.

Equal to −MAX.

source

pub const MIN_POSITIVE: f16 = 6.1035E-5f16

🔬This is a nightly-only experimental API. (f16 #116909)

Smallest positive normal f16 value.

Equal to 2MIN_EXP − 1.

source

pub const MAX: f16 = 65504f16

🔬This is a nightly-only experimental API. (f16 #116909)

Largest finite f16 value.

Equal to (1 − 2MANTISSA_DIGITS) 2MAX_EXP.

source

pub const MIN_EXP: i32 = -13i32

🔬This is a nightly-only experimental API. (f16 #116909)

One greater than the minimum possible normal power of 2 exponent.

If x = MIN_EXP, then normal numbers ≥ 0.5 × 2x.

source

pub const MAX_EXP: i32 = 16i32

🔬This is a nightly-only experimental API. (f16 #116909)

Maximum possible power of 2 exponent.

If x = MAX_EXP, then normal numbers < 1 × 2x.

source

pub const MIN_10_EXP: i32 = -4i32

🔬This is a nightly-only experimental API. (f16 #116909)

Minimum x for which 10x is normal.

Equal to ceil(log10 MIN_POSITIVE).

source

pub const MAX_10_EXP: i32 = 4i32

🔬This is a nightly-only experimental API. (f16 #116909)

Maximum x for which 10x is normal.

Equal to floor(log10 MAX).

source

pub const NAN: f16 = NaN_f16

🔬This is a nightly-only experimental API. (f16 #116909)

Not a Number (NaN).

Note that IEEE 754 doesn’t define just a single NaN value; a plethora of bit patterns are considered to be NaN. Furthermore, the standard makes a difference between a “signaling” and a “quiet” NaN, and allows inspecting its “payload” (the unspecified bits in the bit pattern). This constant isn’t guaranteed to equal to any specific NaN bitpattern, and the stability of its representation over Rust versions and target platforms isn’t guaranteed.

source

pub const INFINITY: f16 = +Inf_f16

🔬This is a nightly-only experimental API. (f16 #116909)

Infinity (∞).

source

pub const NEG_INFINITY: f16 = -Inf_f16

🔬This is a nightly-only experimental API. (f16 #116909)

Negative infinity (−∞).

source

pub const fn is_nan(self) -> bool

🔬This is a nightly-only experimental API. (f16 #116909)

Returns true if this value is NaN.

#![feature(f16)]

let nan = f16::NAN;
let f = 7.0_f16;

assert!(nan.is_nan());
assert!(!f.is_nan());
source

pub const fn is_infinite(self) -> bool

🔬This is a nightly-only experimental API. (f16 #116909)

Returns true if this value is positive infinity or negative infinity, and false otherwise.

#![feature(f16)]

let f = 7.0f16;
let inf = f16::INFINITY;
let neg_inf = f16::NEG_INFINITY;
let nan = f16::NAN;

assert!(!f.is_infinite());
assert!(!nan.is_infinite());

assert!(inf.is_infinite());
assert!(neg_inf.is_infinite());
source

pub const fn is_finite(self) -> bool

🔬This is a nightly-only experimental API. (f16 #116909)

Returns true if this number is neither infinite nor NaN.

#![feature(f16)]

let f = 7.0f16;
let inf: f16 = f16::INFINITY;
let neg_inf: f16 = f16::NEG_INFINITY;
let nan: f16 = f16::NAN;

assert!(f.is_finite());

assert!(!nan.is_finite());
assert!(!inf.is_finite());
assert!(!neg_inf.is_finite());
source

pub const fn is_subnormal(self) -> bool

🔬This is a nightly-only experimental API. (f16 #116909)

Returns true if the number is subnormal.

#![feature(f16)]

let min = f16::MIN_POSITIVE; // 6.1035e-5
let max = f16::MAX;
let lower_than_min = 1.0e-7_f16;
let zero = 0.0_f16;

assert!(!min.is_subnormal());
assert!(!max.is_subnormal());

assert!(!zero.is_subnormal());
assert!(!f16::NAN.is_subnormal());
assert!(!f16::INFINITY.is_subnormal());
// Values between `0` and `min` are Subnormal.
assert!(lower_than_min.is_subnormal());
source

pub const fn is_normal(self) -> bool

🔬This is a nightly-only experimental API. (f16 #116909)

Returns true if the number is neither zero, infinite, subnormal, or NaN.

#![feature(f16)]

let min = f16::MIN_POSITIVE; // 6.1035e-5
let max = f16::MAX;
let lower_than_min = 1.0e-7_f16;
let zero = 0.0_f16;

assert!(min.is_normal());
assert!(max.is_normal());

assert!(!zero.is_normal());
assert!(!f16::NAN.is_normal());
assert!(!f16::INFINITY.is_normal());
// Values between `0` and `min` are Subnormal.
assert!(!lower_than_min.is_normal());
source

pub const fn classify(self) -> FpCategory

🔬This is a nightly-only experimental API. (f16 #116909)

Returns the floating point category of the number. If only one property is going to be tested, it is generally faster to use the specific predicate instead.

#![feature(f16)]

use std::num::FpCategory;

let num = 12.4_f16;
let inf = f16::INFINITY;

assert_eq!(num.classify(), FpCategory::Normal);
assert_eq!(inf.classify(), FpCategory::Infinite);
source

pub fn is_sign_positive(self) -> bool

🔬This is a nightly-only experimental API. (f16 #116909)

Returns true if self has a positive sign, including +0.0, NaNs with positive sign bit and positive infinity.

Note that IEEE 754 doesn’t assign any meaning to the sign bit in case of a NaN, and as Rust doesn’t guarantee that the bit pattern of NaNs are conserved over arithmetic operations, the result of is_sign_positive on a NaN might produce an unexpected or non-portable result. See the specification of NaN bit patterns for more info. Use self.signum() == 1.0 if you need fully portable behavior (will return false for all NaNs).

#![feature(f16)]

let f = 7.0_f16;
let g = -7.0_f16;

assert!(f.is_sign_positive());
assert!(!g.is_sign_positive());
source

pub fn is_sign_negative(self) -> bool

🔬This is a nightly-only experimental API. (f16 #116909)

Returns true if self has a negative sign, including -0.0, NaNs with negative sign bit and negative infinity.

Note that IEEE 754 doesn’t assign any meaning to the sign bit in case of a NaN, and as Rust doesn’t guarantee that the bit pattern of NaNs are conserved over arithmetic operations, the result of is_sign_negative on a NaN might produce an unexpected or non-portable result. See the specification of NaN bit patterns for more info. Use self.signum() == -1.0 if you need fully portable behavior (will return false for all NaNs).

#![feature(f16)]

let f = 7.0_f16;
let g = -7.0_f16;

assert!(!f.is_sign_negative());
assert!(g.is_sign_negative());
source

pub fn next_up(self) -> Self

🔬This is a nightly-only experimental API. (f16 #116909)

Returns the least number greater than self.

Let TINY be the smallest representable positive f16. Then,

  • if self.is_nan(), this returns self;
  • if self is NEG_INFINITY, this returns MIN;
  • if self is -TINY, this returns -0.0;
  • if self is -0.0 or +0.0, this returns TINY;
  • if self is MAX or INFINITY, this returns INFINITY;
  • otherwise the unique least value greater than self is returned.

The identity x.next_up() == -(-x).next_down() holds for all non-NaN x. When x is finite x == x.next_up().next_down() also holds.

#![feature(f16)]
#![feature(float_next_up_down)]

// f16::EPSILON is the difference between 1.0 and the next number up.
assert_eq!(1.0f16.next_up(), 1.0 + f16::EPSILON);
// But not for most numbers.
assert!(0.1f16.next_up() < 0.1 + f16::EPSILON);
assert_eq!(4356f16.next_up(), 4360.0);
source

pub fn next_down(self) -> Self

🔬This is a nightly-only experimental API. (f16 #116909)

Returns the greatest number less than self.

Let TINY be the smallest representable positive f16. Then,

  • if self.is_nan(), this returns self;
  • if self is INFINITY, this returns MAX;
  • if self is TINY, this returns 0.0;
  • if self is -0.0 or +0.0, this returns -TINY;
  • if self is MIN or NEG_INFINITY, this returns NEG_INFINITY;
  • otherwise the unique greatest value less than self is returned.

The identity x.next_down() == -(-x).next_up() holds for all non-NaN x. When x is finite x == x.next_down().next_up() also holds.

#![feature(f16)]
#![feature(float_next_up_down)]

let x = 1.0f16;
// Clamp value into range [0, 1).
let clamped = x.clamp(0.0, 1.0f16.next_down());
assert!(clamped < 1.0);
assert_eq!(clamped.next_up(), 1.0);
source

pub fn recip(self) -> Self

🔬This is a nightly-only experimental API. (f16 #116909)

Takes the reciprocal (inverse) of a number, 1/x.

#![feature(f16)]

let x = 2.0_f16;
let abs_difference = (x.recip() - (1.0 / x)).abs();

assert!(abs_difference <= f16::EPSILON);
source

pub fn to_degrees(self) -> Self

🔬This is a nightly-only experimental API. (f16 #116909)

Converts radians to degrees.

#![feature(f16)]

let angle = std::f16::consts::PI;

let abs_difference = (angle.to_degrees() - 180.0).abs();
assert!(abs_difference <= 0.5);
source

pub fn to_radians(self) -> f16

🔬This is a nightly-only experimental API. (f16 #116909)

Converts degrees to radians.

#![feature(f16)]

let angle = 180.0f16;

let abs_difference = (angle.to_radians() - std::f16::consts::PI).abs();

assert!(abs_difference <= 0.01);
source

pub fn max(self, other: f16) -> f16

🔬This is a nightly-only experimental API. (f16 #116909)

Returns the maximum of the two numbers, ignoring NaN.

If one of the arguments is NaN, then the other argument is returned. This follows the IEEE 754-2008 semantics for maxNum, except for handling of signaling NaNs; this function handles all NaNs the same way and avoids maxNum’s problems with associativity. This also matches the behavior of libm’s fmax.

#![feature(f16)]

let x = 1.0f16;
let y = 2.0f16;

assert_eq!(x.max(y), y);
source

pub fn min(self, other: f16) -> f16

🔬This is a nightly-only experimental API. (f16 #116909)

Returns the minimum of the two numbers, ignoring NaN.

If one of the arguments is NaN, then the other argument is returned. This follows the IEEE 754-2008 semantics for minNum, except for handling of signaling NaNs; this function handles all NaNs the same way and avoids minNum’s problems with associativity. This also matches the behavior of libm’s fmin.

#![feature(f16)]

let x = 1.0f16;
let y = 2.0f16;

assert_eq!(x.min(y), x);
source

pub fn maximum(self, other: f16) -> f16

🔬This is a nightly-only experimental API. (f16 #116909)

Returns the maximum of the two numbers, propagating NaN.

This returns NaN when either argument is NaN, as opposed to f16::max which only returns NaN when both arguments are NaN.

#![feature(f16)]
#![feature(float_minimum_maximum)]

let x = 1.0f16;
let y = 2.0f16;

assert_eq!(x.maximum(y), y);
assert!(x.maximum(f16::NAN).is_nan());

If one of the arguments is NaN, then NaN is returned. Otherwise this returns the greater of the two numbers. For this operation, -0.0 is considered to be less than +0.0. Note that this follows the semantics specified in IEEE 754-2019.

Also note that “propagation” of NaNs here doesn’t necessarily mean that the bitpattern of a NaN operand is conserved; see the specification of NaN bit patterns for more info.

source

pub fn minimum(self, other: f16) -> f16

🔬This is a nightly-only experimental API. (f16 #116909)

Returns the minimum of the two numbers, propagating NaN.

This returns NaN when either argument is NaN, as opposed to f16::min which only returns NaN when both arguments are NaN.

#![feature(f16)]
#![feature(float_minimum_maximum)]

let x = 1.0f16;
let y = 2.0f16;

assert_eq!(x.minimum(y), x);
assert!(x.minimum(f16::NAN).is_nan());

If one of the arguments is NaN, then NaN is returned. Otherwise this returns the lesser of the two numbers. For this operation, -0.0 is considered to be less than +0.0. Note that this follows the semantics specified in IEEE 754-2019.

Also note that “propagation” of NaNs here doesn’t necessarily mean that the bitpattern of a NaN operand is conserved; see the specification of NaN bit patterns for more info.

source

pub fn midpoint(self, other: f16) -> f16

🔬This is a nightly-only experimental API. (f16 #116909)

Calculates the middle point of self and rhs.

This returns NaN when either argument is NaN or if a combination of +inf and -inf is provided as arguments.

§Examples
#![feature(f16)]
#![feature(num_midpoint)]

assert_eq!(1f16.midpoint(4.0), 2.5);
assert_eq!((-5.5f16).midpoint(8.0), 1.25);
source

pub unsafe fn to_int_unchecked<Int>(self) -> Int
where Self: FloatToInt<Int>,

🔬This is a nightly-only experimental API. (f16 #116909)

Rounds toward zero and converts to any primitive integer type, assuming that the value is finite and fits in that type.

#![feature(f16)]

let value = 4.6_f16;
let rounded = unsafe { value.to_int_unchecked::<u16>() };
assert_eq!(rounded, 4);

let value = -128.9_f16;
let rounded = unsafe { value.to_int_unchecked::<i8>() };
assert_eq!(rounded, i8::MIN);
§Safety

The value must:

  • Not be NaN
  • Not be infinite
  • Be representable in the return type Int, after truncating off its fractional part
source

pub const fn to_bits(self) -> u16

🔬This is a nightly-only experimental API. (f16 #116909)

Raw transmutation to u16.

This is currently identical to transmute::<f16, u16>(self) on all platforms.

See from_bits for some discussion of the portability of this operation (there are almost no issues).

Note that this function is distinct from as casting, which attempts to preserve the numeric value, and not the bitwise value.

#![feature(f16)]

assert_eq!((12.5f16).to_bits(), 0x4a40);
source

pub const fn from_bits(v: u16) -> Self

🔬This is a nightly-only experimental API. (f16 #116909)

Raw transmutation from u16.

This is currently identical to transmute::<u16, f16>(v) on all platforms. It turns out this is incredibly portable, for two reasons:

  • Floats and Ints have the same endianness on all supported platforms.
  • IEEE 754 very precisely specifies the bit layout of floats.

However there is one caveat: prior to the 2008 version of IEEE 754, how to interpret the NaN signaling bit wasn’t actually specified. Most platforms (notably x86 and ARM) picked the interpretation that was ultimately standardized in 2008, but some didn’t (notably MIPS). As a result, all signaling NaNs on MIPS are quiet NaNs on x86, and vice-versa.

Rather than trying to preserve signaling-ness cross-platform, this implementation favors preserving the exact bits. This means that any payloads encoded in NaNs will be preserved even if the result of this method is sent over the network from an x86 machine to a MIPS one.

If the results of this method are only manipulated by the same architecture that produced them, then there is no portability concern.

If the input isn’t NaN, then there is no portability concern.

If you don’t care about signalingness (very likely), then there is no portability concern.

Note that this function is distinct from as casting, which attempts to preserve the numeric value, and not the bitwise value.

#![feature(f16)]

let v = f16::from_bits(0x4a40);
assert_eq!(v, 12.5);
source

pub const fn to_be_bytes(self) -> [u8; 2]

🔬This is a nightly-only experimental API. (f16 #116909)

Returns the memory representation of this floating point number as a byte array in big-endian (network) byte order.

See from_bits for some discussion of the portability of this operation (there are almost no issues).

§Examples
#![feature(f16)]

let bytes = 12.5f16.to_be_bytes();
assert_eq!(bytes, [0x4a, 0x40]);
source

pub const fn to_le_bytes(self) -> [u8; 2]

🔬This is a nightly-only experimental API. (f16 #116909)

Returns the memory representation of this floating point number as a byte array in little-endian byte order.

See from_bits for some discussion of the portability of this operation (there are almost no issues).

§Examples
#![feature(f16)]

let bytes = 12.5f16.to_le_bytes();
assert_eq!(bytes, [0x40, 0x4a]);
source

pub const fn to_ne_bytes(self) -> [u8; 2]

🔬This is a nightly-only experimental API. (f16 #116909)

Returns the memory representation of this floating point number as a byte array in native byte order.

As the target platform’s native endianness is used, portable code should use to_be_bytes or to_le_bytes, as appropriate, instead.

See from_bits for some discussion of the portability of this operation (there are almost no issues).

§Examples
#![feature(f16)]

let bytes = 12.5f16.to_ne_bytes();
assert_eq!(
    bytes,
    if cfg!(target_endian = "big") {
        [0x4a, 0x40]
    } else {
        [0x40, 0x4a]
    }
);
source

pub const fn from_be_bytes(bytes: [u8; 2]) -> Self

🔬This is a nightly-only experimental API. (f16 #116909)

Creates a floating point value from its representation as a byte array in big endian.

See from_bits for some discussion of the portability of this operation (there are almost no issues).

§Examples
#![feature(f16)]

let value = f16::from_be_bytes([0x4a, 0x40]);
assert_eq!(value, 12.5);
source

pub const fn from_le_bytes(bytes: [u8; 2]) -> Self

🔬This is a nightly-only experimental API. (f16 #116909)

Creates a floating point value from its representation as a byte array in little endian.

See from_bits for some discussion of the portability of this operation (there are almost no issues).

§Examples
#![feature(f16)]

let value = f16::from_le_bytes([0x40, 0x4a]);
assert_eq!(value, 12.5);
source

pub const fn from_ne_bytes(bytes: [u8; 2]) -> Self

🔬This is a nightly-only experimental API. (f16 #116909)

Creates a floating point value from its representation as a byte array in native endian.

As the target platform’s native endianness is used, portable code likely wants to use from_be_bytes or from_le_bytes, as appropriate instead.

See from_bits for some discussion of the portability of this operation (there are almost no issues).

§Examples
#![feature(f16)]

let value = f16::from_ne_bytes(if cfg!(target_endian = "big") {
    [0x4a, 0x40]
} else {
    [0x40, 0x4a]
});
assert_eq!(value, 12.5);
source

pub fn total_cmp(&self, other: &Self) -> Ordering

🔬This is a nightly-only experimental API. (f16 #116909)

Returns the ordering between self and other.

Unlike the standard partial comparison between floating point numbers, this comparison always produces an ordering in accordance to the totalOrder predicate as defined in the IEEE 754 (2008 revision) floating point standard. The values are ordered in the following sequence:

  • negative quiet NaN
  • negative signaling NaN
  • negative infinity
  • negative numbers
  • negative subnormal numbers
  • negative zero
  • positive zero
  • positive subnormal numbers
  • positive numbers
  • positive infinity
  • positive signaling NaN
  • positive quiet NaN.

The ordering established by this function does not always agree with the PartialOrd and PartialEq implementations of f16. For example, they consider negative and positive zero equal, while total_cmp doesn’t.

The interpretation of the signaling NaN bit follows the definition in the IEEE 754 standard, which may not match the interpretation by some of the older, non-conformant (e.g. MIPS) hardware implementations.

§Example
#![feature(f16)]

struct GoodBoy {
    name: &'static str,
    weight: f16,
}

let mut bois = vec![
    GoodBoy { name: "Pucci", weight: 0.1 },
    GoodBoy { name: "Woofer", weight: 99.0 },
    GoodBoy { name: "Yapper", weight: 10.0 },
    GoodBoy { name: "Chonk", weight: f16::INFINITY },
    GoodBoy { name: "Abs. Unit", weight: f16::NAN },
    GoodBoy { name: "Floaty", weight: -5.0 },
];

bois.sort_by(|a, b| a.weight.total_cmp(&b.weight));

// `f16::NAN` could be positive or negative, which will affect the sort order.
if f16::NAN.is_sign_negative() {
    bois.into_iter().map(|b| b.weight)
        .zip([f16::NAN, -5.0, 0.1, 10.0, 99.0, f16::INFINITY].iter())
        .for_each(|(a, b)| assert_eq!(a.to_bits(), b.to_bits()))
} else {
    bois.into_iter().map(|b| b.weight)
        .zip([-5.0, 0.1, 10.0, 99.0, f16::INFINITY, f16::NAN].iter())
        .for_each(|(a, b)| assert_eq!(a.to_bits(), b.to_bits()))
}
source

pub fn clamp(self, min: f16, max: f16) -> f16

🔬This is a nightly-only experimental API. (f16 #116909)

Restrict a value to a certain interval unless it is NaN.

Returns max if self is greater than max, and min if self is less than min. Otherwise this returns self.

Note that this function returns NaN if the initial value was NaN as well.

§Panics

Panics if min > max, min is NaN, or max is NaN.

§Examples
#![feature(f16)]

assert!((-3.0f16).clamp(-2.0, 1.0) == -2.0);
assert!((0.0f16).clamp(-2.0, 1.0) == 0.0);
assert!((2.0f16).clamp(-2.0, 1.0) == 1.0);
assert!((f16::NAN).clamp(-2.0, 1.0).is_nan());

Trait Implementations§

1.0.0 · source§

impl Add<&f16> for &f16

source§

type Output = <f16 as Add>::Output

The resulting type after applying the + operator.
source§

fn add(self, other: &f16) -> <f16 as Add<f16>>::Output

Performs the + operation. Read more
1.0.0 · source§

impl Add<&f16> for f16

source§

type Output = <f16 as Add>::Output

The resulting type after applying the + operator.
source§

fn add(self, other: &f16) -> <f16 as Add<f16>>::Output

Performs the + operation. Read more
1.0.0 · source§

impl<'a> Add<f16> for &'a f16

source§

type Output = <f16 as Add>::Output

The resulting type after applying the + operator.
source§

fn add(self, other: f16) -> <f16 as Add<f16>>::Output

Performs the + operation. Read more
1.0.0 · source§

impl Add for f16

source§

type Output = f16

The resulting type after applying the + operator.
source§

fn add(self, other: f16) -> f16

Performs the + operation. Read more
1.22.0 · source§

impl AddAssign<&f16> for f16

source§

fn add_assign(&mut self, other: &f16)

Performs the += operation. Read more
1.8.0 · source§

impl AddAssign for f16

source§

fn add_assign(&mut self, other: f16)

Performs the += operation. Read more
1.0.0 · source§

impl Clone for f16

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
1.0.0 · source§

impl Debug for f16

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
1.0.0 · source§

impl Default for f16

source§

fn default() -> f16

Returns the default value of 0.0

1.0.0 · source§

impl Div<&f16> for &f16

source§

type Output = <f16 as Div>::Output

The resulting type after applying the / operator.
source§

fn div(self, other: &f16) -> <f16 as Div<f16>>::Output

Performs the / operation. Read more
1.0.0 · source§

impl Div<&f16> for f16

source§

type Output = <f16 as Div>::Output

The resulting type after applying the / operator.
source§

fn div(self, other: &f16) -> <f16 as Div<f16>>::Output

Performs the / operation. Read more
1.0.0 · source§

impl<'a> Div<f16> for &'a f16

source§

type Output = <f16 as Div>::Output

The resulting type after applying the / operator.
source§

fn div(self, other: f16) -> <f16 as Div<f16>>::Output

Performs the / operation. Read more
1.0.0 · source§

impl Div for f16

source§

type Output = f16

The resulting type after applying the / operator.
source§

fn div(self, other: f16) -> f16

Performs the / operation. Read more
1.22.0 · source§

impl DivAssign<&f16> for f16

source§

fn div_assign(&mut self, other: &f16)

Performs the /= operation. Read more
1.8.0 · source§

impl DivAssign for f16

source§

fn div_assign(&mut self, other: f16)

Performs the /= operation. Read more
1.6.0 · source§

impl From<f16> for f128

source§

fn from(small: f16) -> Self

Converts f16 to f128 losslessly.

1.6.0 · source§

impl From<f16> for f64

source§

fn from(small: f16) -> Self

Converts f16 to f64 losslessly.

1.0.0 · source§

impl Mul<&f16> for &f16

source§

type Output = <f16 as Mul>::Output

The resulting type after applying the * operator.
source§

fn mul(self, other: &f16) -> <f16 as Mul<f16>>::Output

Performs the * operation. Read more
1.0.0 · source§

impl Mul<&f16> for f16

source§

type Output = <f16 as Mul>::Output

The resulting type after applying the * operator.
source§

fn mul(self, other: &f16) -> <f16 as Mul<f16>>::Output

Performs the * operation. Read more
1.0.0 · source§

impl<'a> Mul<f16> for &'a f16

source§

type Output = <f16 as Mul>::Output

The resulting type after applying the * operator.
source§

fn mul(self, other: f16) -> <f16 as Mul<f16>>::Output

Performs the * operation. Read more
1.0.0 · source§

impl Mul for f16

source§

type Output = f16

The resulting type after applying the * operator.
source§

fn mul(self, other: f16) -> f16

Performs the * operation. Read more
1.22.0 · source§

impl MulAssign<&f16> for f16

source§

fn mul_assign(&mut self, other: &f16)

Performs the *= operation. Read more
1.8.0 · source§

impl MulAssign for f16

source§

fn mul_assign(&mut self, other: f16)

Performs the *= operation. Read more
1.0.0 · source§

impl Neg for &f16

source§

type Output = <f16 as Neg>::Output

The resulting type after applying the - operator.
source§

fn neg(self) -> <f16 as Neg>::Output

Performs the unary - operation. Read more
1.0.0 · source§

impl Neg for f16

source§

type Output = f16

The resulting type after applying the - operator.
source§

fn neg(self) -> f16

Performs the unary - operation. Read more
1.0.0 · source§

impl PartialEq for f16

source§

fn eq(&self, other: &f16) -> bool

Tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &f16) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.0.0 · source§

impl PartialOrd for f16

source§

fn partial_cmp(&self, other: &f16) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &f16) -> bool

Tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &f16) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn ge(&self, other: &f16) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

fn gt(&self, other: &f16) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

impl Rem<&f16> for &f16

source§

type Output = <f16 as Rem>::Output

The resulting type after applying the % operator.
source§

fn rem(self, other: &f16) -> <f16 as Rem<f16>>::Output

Performs the % operation. Read more
1.0.0 · source§

impl Rem<&f16> for f16

source§

type Output = <f16 as Rem>::Output

The resulting type after applying the % operator.
source§

fn rem(self, other: &f16) -> <f16 as Rem<f16>>::Output

Performs the % operation. Read more
1.0.0 · source§

impl<'a> Rem<f16> for &'a f16

source§

type Output = <f16 as Rem>::Output

The resulting type after applying the % operator.
source§

fn rem(self, other: f16) -> <f16 as Rem<f16>>::Output

Performs the % operation. Read more
1.0.0 · source§

impl Rem for f16

The remainder from the division of two floats.

The remainder has the same sign as the dividend and is computed as: x - (x / y).trunc() * y.

§Examples

let x: f32 = 50.50;
let y: f32 = 8.125;
let remainder = x - (x / y).trunc() * y;

// The answer to both operations is 1.75
assert_eq!(x % y, remainder);
source§

type Output = f16

The resulting type after applying the % operator.
source§

fn rem(self, other: f16) -> f16

Performs the % operation. Read more
1.22.0 · source§

impl RemAssign<&f16> for f16

source§

fn rem_assign(&mut self, other: &f16)

Performs the %= operation. Read more
1.8.0 · source§

impl RemAssign for f16

source§

fn rem_assign(&mut self, other: f16)

Performs the %= operation. Read more
1.0.0 · source§

impl Sub<&f16> for &f16

source§

type Output = <f16 as Sub>::Output

The resulting type after applying the - operator.
source§

fn sub(self, other: &f16) -> <f16 as Sub<f16>>::Output

Performs the - operation. Read more
1.0.0 · source§

impl Sub<&f16> for f16

source§

type Output = <f16 as Sub>::Output

The resulting type after applying the - operator.
source§

fn sub(self, other: &f16) -> <f16 as Sub<f16>>::Output

Performs the - operation. Read more
1.0.0 · source§

impl<'a> Sub<f16> for &'a f16

source§

type Output = <f16 as Sub>::Output

The resulting type after applying the - operator.
source§

fn sub(self, other: f16) -> <f16 as Sub<f16>>::Output

Performs the - operation. Read more
1.0.0 · source§

impl Sub for f16

source§

type Output = f16

The resulting type after applying the - operator.
source§

fn sub(self, other: f16) -> f16

Performs the - operation. Read more
1.22.0 · source§

impl SubAssign<&f16> for f16

source§

fn sub_assign(&mut self, other: &f16)

Performs the -= operation. Read more
1.8.0 · source§

impl SubAssign for f16

source§

fn sub_assign(&mut self, other: f16)

Performs the -= operation. Read more
1.0.0 · source§

impl Copy for f16

source§

impl FloatToInt<i128> for f16

source§

impl FloatToInt<i16> for f16

source§

impl FloatToInt<i32> for f16

source§

impl FloatToInt<i64> for f16

source§

impl FloatToInt<i8> for f16

source§

impl FloatToInt<isize> for f16

source§

impl FloatToInt<u128> for f16

source§

impl FloatToInt<u16> for f16

source§

impl FloatToInt<u32> for f16

source§

impl FloatToInt<u64> for f16

source§

impl FloatToInt<u8> for f16

source§

impl FloatToInt<usize> for f16

Auto Trait Implementations§

§

impl Freeze for f16

§

impl RefUnwindSafe for f16

§

impl Send for f16

§

impl Sync for f16

§

impl Unpin for f16

§

impl UnwindSafe for f16

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit #126799)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.