Primitive Type char

A character type.

The char type represents a single character. More specifically, since ‘character’ isn’t a well-defined concept in Unicode, char is a ‘Unicode scalar value’.

This documentation describes a number of methods and trait implementations on the char type. For technical reasons, there is additional, separate documentation in the std::char module as well.

Validity and Layout

A char is a ‘Unicode scalar value’, which is any ‘Unicode code point’ other than a surrogate code point. This has a fixed numerical definition: code points are in the range 0 to 0x10FFFF, inclusive. Surrogate code points, used by UTF-16, are in the range 0xD800 to 0xDFFF.

No char may be constructed, whether as a literal or at runtime, that is not a Unicode scalar value. Violating this rule causes undefined behavior.

// Each of these is a compiler error
['\u{D800}', '\u{DFFF}', '\u{110000}'];

// Panics; from_u32 returns None.
char::from_u32(0xDE01).unwrap();

// Undefined behaviour
let _ = unsafe { char::from_u32_unchecked(0x110000) };

Unicode scalar values are also the exact set of values that may be encoded in UTF-8. Because char values are Unicode scalar values and functions may assume incoming str values are valid UTF-8, it is safe to store any char in a str or read any character from a str as a char.

The gap in valid char values is understood by the compiler, so in the below example the two ranges are understood to cover the whole range of possible char values and there is no error for a non-exhaustive match.

let c: char = 'a';
match c {
    '\0' ..= '\u{D7FF}' => false,
    '\u{E000}' ..= '\u{10FFFF}' => true,
};

All Unicode scalar values are valid char values, but not all of them represent a real character. Many Unicode scalar values are not currently assigned to a character, but may be in the future (“reserved”); some will never be a character (“noncharacters”); and some may be given different meanings by different users (“private use”).

char is guaranteed to have the same size, alignment, and function call ABI as u32 on all platforms.

use std::alloc::Layout;
assert_eq!(Layout::new::<char>(), Layout::new::<u32>());

Representation

char is always four bytes in size. This is a different representation than a given character would have as part of a String. For example:

let v = vec!['h', 'e', 'l', 'l', 'o'];

// five elements times four bytes for each element
assert_eq!(20, v.len() * std::mem::size_of::<char>());

let s = String::from("hello");

// five elements times one byte per element
assert_eq!(5, s.len() * std::mem::size_of::<u8>());

As always, remember that a human intuition for ‘character’ might not map to Unicode’s definitions. For example, despite looking similar, the ‘é’ character is one Unicode code point while ‘é’ is two Unicode code points:

let mut chars = "é".chars();
// U+00e9: 'latin small letter e with acute'
assert_eq!(Some('\u{00e9}'), chars.next());
assert_eq!(None, chars.next());

let mut chars = "é".chars();
// U+0065: 'latin small letter e'
assert_eq!(Some('\u{0065}'), chars.next());
// U+0301: 'combining acute accent'
assert_eq!(Some('\u{0301}'), chars.next());
assert_eq!(None, chars.next());

This means that the contents of the first string above will fit into a char while the contents of the second string will not. Trying to create a char literal with the contents of the second string gives an error:

error: character literal may only contain one codepoint: 'é'
let c = 'é';
        ^^^

Another implication of the 4-byte fixed size of a char is that per-char processing can end up using a lot more memory:

let s = String::from("love: ❤️");
let v: Vec<char> = s.chars().collect();

assert_eq!(12, std::mem::size_of_val(&s[..]));
assert_eq!(32, std::mem::size_of_val(&v[..]));

Implementations

impl char

pub const MIN: char = '\0'

The lowest valid code point a char can have, '\0'.

Unlike integer types, char actually has a gap in the middle, meaning that the range of possible chars is smaller than you might expect. Ranges of char will automatically hop this gap for you:

let dist = u32::from(char::MAX) - u32::from(char::MIN);
let size = (char::MIN..=char::MAX).count() as u32;
assert!(size < dist);

Despite this gap, the MIN and MAX values can be used as bounds for all char values.

Examples

let c: char = something_which_returns_char();
assert!(char::MIN <= c);

let value_at_min = u32::from(char::MIN);
assert_eq!(char::from_u32(value_at_min), Some('\0'));

pub const MAX: char = '\u{10ffff}'

The highest valid code point a char can have, '\u{10FFFF}'.

Unlike integer types, char actually has a gap in the middle, meaning that the range of possible chars is smaller than you might expect. Ranges of char will automatically hop this gap for you:

let dist = u32::from(char::MAX) - u32::from(char::MIN);
let size = (char::MIN..=char::MAX).count() as u32;
assert!(size < dist);

Despite this gap, the MIN and MAX values can be used as bounds for all char values.

Examples

let c: char = something_which_returns_char();
assert!(c <= char::MAX);

let value_at_max = u32::from(char::MAX);
assert_eq!(char::from_u32(value_at_max), Some('\u{10FFFF}'));
assert_eq!(char::from_u32(value_at_max + 1), None);

pub const REPLACEMENT_CHARACTER: char = '�'

U+FFFD REPLACEMENT CHARACTER (�) is used in Unicode to represent a decoding error.

It can occur, for example, when giving ill-formed UTF-8 bytes to String::from_utf8_lossy.

pub const UNICODE_VERSION: (u8, u8, u8) = crate::unicode::UNICODE_VERSION

The version of Unicode that the Unicode parts of char and str methods are based on.

New versions of Unicode are released regularly and subsequently all methods in the standard library depending on Unicode are updated. Therefore the behavior of some char and str methods and the value of this constant changes over time. This is not considered to be a breaking change.

The version numbering scheme is explained in Unicode 11.0 or later, Section 3.1 Versions of the Unicode Standard.

pub fn decode_utf16<I>(iter: I) -> DecodeUtf16<<I as IntoIterator>::IntoIter>

where I: IntoIterator<Item = u16>,

Creates an iterator over the UTF-16 encoded code points in iter, returning unpaired surrogates as Errs.

Examples

Basic usage:

// 𝄞mus<invalid>ic<invalid>
let v = [
    0xD834, 0xDD1E, 0x006d, 0x0075, 0x0073, 0xDD1E, 0x0069, 0x0063, 0xD834,
];

assert_eq!(
    char::decode_utf16(v)
        .map(|r| r.map_err(|e| e.unpaired_surrogate()))
        .collect::<Vec<_>>(),
    vec![
        Ok('𝄞'),
        Ok('m'), Ok('u'), Ok('s'),
        Err(0xDD1E),
        Ok('i'), Ok('c'),
        Err(0xD834)
    ]
);

A lossy decoder can be obtained by replacing Err results with the replacement character:

// 𝄞mus<invalid>ic<invalid>
let v = [
    0xD834, 0xDD1E, 0x006d, 0x0075, 0x0073, 0xDD1E, 0x0069, 0x0063, 0xD834,
];

assert_eq!(
    char::decode_utf16(v)
       .map(|r| r.unwrap_or(char::REPLACEMENT_CHARACTER))
       .collect::<String>(),
    "𝄞mus�ic�"
);

pub const fn from_u32(i: u32) -> Option<char>

Converts a u32 to a char.

Note that all chars are valid u32s, and can be cast to one with as:

let c = '💯';
let i = c as u32;

assert_eq!(128175, i);

However, the reverse is not true: not all valid u32s are valid chars. from_u32() will return None if the input is not a valid value for a char.

For an unsafe version of this function which ignores these checks, see from_u32_unchecked.

Examples

Basic usage:

let c = char::from_u32(0x2764);

assert_eq!(Some('❤'), c);

Returning None when the input is not a valid char:

let c = char::from_u32(0x110000);

assert_eq!(None, c);

pub const unsafe fn from_u32_unchecked(i: u32) -> char

Converts a u32 to a char, ignoring validity.

Note that all chars are valid u32s, and can be cast to one with as:

let c = '💯';
let i = c as u32;

assert_eq!(128175, i);

However, the reverse is not true: not all valid u32s are valid chars. from_u32_unchecked() will ignore this, and blindly cast to char, possibly creating an invalid one.

Safety

This function is unsafe, as it may construct invalid char values.

For a safe version of this function, see the from_u32 function.

Examples

Basic usage:

let c = unsafe { char::from_u32_unchecked(0x2764) };

assert_eq!('❤', c);

pub const fn from_digit(num: u32, radix: u32) -> Option<char>

Converts a digit in the given radix to a char.

A ‘radix’ here is sometimes also called a ‘base’. A radix of two indicates a binary number, a radix of ten, decimal, and a radix of sixteen, hexadecimal, to give some common values. Arbitrary radices are supported.

from_digit() will return None if the input is not a digit in the given radix.

Panics

Panics if given a radix larger than 36.

Examples

Basic usage:

let c = char::from_digit(4, 10);

assert_eq!(Some('4'), c);

// Decimal 11 is a single digit in base 16
let c = char::from_digit(11, 16);

assert_eq!(Some('b'), c);

Returning None when the input is not a digit:

let c = char::from_digit(20, 10);

assert_eq!(None, c);

Passing a large radix, causing a panic:

// this panics
let _c = char::from_digit(1, 37);

pub fn is_digit(self, radix: u32) -> bool

Checks if a char is a digit in the given radix.

A ‘radix’ here is sometimes also called a ‘base’. A radix of two indicates a binary number, a radix of ten, decimal, and a radix of sixteen, hexadecimal, to give some common values. Arbitrary radices are supported.

Compared to is_numeric(), this function only recognizes the characters 0-9, a-z and A-Z.

‘Digit’ is defined to be only the following characters:

• 0-9
• a-z
• A-Z

For a more comprehensive understanding of ‘digit’, see is_numeric().

Panics

Panics if given a radix larger than 36.

Examples

Basic usage:

assert!('1'.is_digit(10));
assert!('f'.is_digit(16));
assert!(!'f'.is_digit(10));

Passing a large radix, causing a panic:

// this panics
'1'.is_digit(37);

pub const fn to_digit(self, radix: u32) -> Option<u32>

Converts a char to a digit in the given radix.

A ‘radix’ here is sometimes also called a ‘base’. A radix of two indicates a binary number, a radix of ten, decimal, and a radix of sixteen, hexadecimal, to give some common values. Arbitrary radices are supported.

‘Digit’ is defined to be only the following characters:

• 0-9
• a-z
• A-Z

Errors

Returns None if the char does not refer to a digit in the given radix.

Panics

Panics if given a radix larger than 36.

Examples

Basic usage:

assert_eq!('1'.to_digit(10), Some(1));
assert_eq!('f'.to_digit(16), Some(15));

Passing a non-digit results in failure:

assert_eq!('f'.to_digit(10), None);
assert_eq!('z'.to_digit(16), None);

Passing a large radix, causing a panic:

// this panics
let _ = '1'.to_digit(37);

pub fn escape_unicode(self) -> EscapeUnicode

Returns an iterator that yields the hexadecimal Unicode escape of a character as chars.

This will escape characters with the Rust syntax of the form \u{NNNNNN} where NNNNNN is a hexadecimal representation.

Examples

As an iterator:

for c in '❤'.escape_unicode() {
    print!("{c}");
}
println!();

Using println! directly:

println!("{}", '❤'.escape_unicode());

Both are equivalent to:

println!("\\u{{2764}}");

Using to_string:

assert_eq!('❤'.escape_unicode().to_string(), "\\u{2764}");

pub fn escape_debug(self) -> EscapeDebug

Returns an iterator that yields the literal escape code of a character as chars.

This will escape the characters similar to the Debug implementations of str or char.

Examples

As an iterator:

for c in '\n'.escape_debug() {
    print!("{c}");
}
println!();

Using println! directly:

println!("{}", '\n'.escape_debug());

Both are equivalent to:

println!("\\n");

Using to_string:

assert_eq!('\n'.escape_debug().to_string(), "\\n");

pub fn escape_default(self) -> EscapeDefault

Returns an iterator that yields the literal escape code of a character as chars.

The default is chosen with a bias toward producing literals that are legal in a variety of languages, including C++11 and similar C-family languages. The exact rules are:

• Tab is escaped as \t.
• Carriage return is escaped as \r.
• Line feed is escaped as \n.
• Single quote is escaped as \'.
• Double quote is escaped as \".
• Backslash is escaped as \\.
• Any character in the ‘printable ASCII’ range 0x20 .. 0x7e inclusive is not escaped.
• All other characters are given hexadecimal Unicode escapes; see escape_unicode.

Examples

As an iterator:

for c in '"'.escape_default() {
    print!("{c}");
}
println!();

Using println! directly:

println!("{}", '"'.escape_default());

Both are equivalent to:

println!("\\\"");

Using to_string:

assert_eq!('"'.escape_default().to_string(), "\\\"");

pub const fn len_utf8(self) -> usize

Returns the number of bytes this char would need if encoded in UTF-8.

That number of bytes is always between 1 and 4, inclusive.

Examples

Basic usage:

let len = 'A'.len_utf8();
assert_eq!(len, 1);

let len = 'ß'.len_utf8();
assert_eq!(len, 2);

let len = 'ℝ'.len_utf8();
assert_eq!(len, 3);

let len = '💣'.len_utf8();
assert_eq!(len, 4);

The &str type guarantees that its contents are UTF-8, and so we can compare the length it would take if each code point was represented as a char vs in the &str itself:

// as chars
let eastern = '東';
let capital = '京';

// both can be represented as three bytes
assert_eq!(3, eastern.len_utf8());
assert_eq!(3, capital.len_utf8());

// as a &str, these two are encoded in UTF-8
let tokyo = "東京";

let len = eastern.len_utf8() + capital.len_utf8();

// we can see that they take six bytes total...
assert_eq!(6, tokyo.len());

// ... just like the &str
assert_eq!(len, tokyo.len());

pub const fn len_utf16(self) -> usize

Returns the number of 16-bit code units this char would need if encoded in UTF-16.

That number of code units is always either 1 or 2, for unicode scalar values in the basic multilingual plane or supplementary planes respectively.

See the documentation for len_utf8() for more explanation of this concept. This function is a mirror, but for UTF-16 instead of UTF-8.

Examples

Basic usage:

let n = 'ß'.len_utf16();
assert_eq!(n, 1);

let len = '💣'.len_utf16();
assert_eq!(len, 2);

pub const fn encode_utf8(self, dst: &mut [u8]) -> &mut str

Encodes this character as UTF-8 into the provided byte buffer, and then returns the subslice of the buffer that contains the encoded character.

Panics

Panics if the buffer is not large enough. A buffer of length four is large enough to encode any char.

Examples

In both of these examples, ‘ß’ takes two bytes to encode.

let mut b = [0; 2];

let result = 'ß'.encode_utf8(&mut b);

assert_eq!(result, "ß");

assert_eq!(result.len(), 2);

A buffer that’s too small:

let mut b = [0; 1];

// this panics
'ß'.encode_utf8(&mut b);

pub fn encode_utf16(self, dst: &mut [u16]) -> &mut [u16]

Encodes this character as UTF-16 into the provided u16 buffer, and then returns the subslice of the buffer that contains the encoded character.

Panics

Panics if the buffer is not large enough. A buffer of length 2 is large enough to encode any char.

Examples

In both of these examples, ‘𝕊’ takes two u16s to encode.

let mut b = [0; 2];

let result = '𝕊'.encode_utf16(&mut b);

assert_eq!(result.len(), 2);

A buffer that’s too small:

let mut b = [0; 1];

// this panics
'𝕊'.encode_utf16(&mut b);

pub fn is_alphabetic(self) -> bool

Returns true if this char has the Alphabetic property.

Alphabetic is described in Chapter 4 (Character Properties) of the Unicode Standard and specified in the Unicode Character Database DerivedCoreProperties.txt.

Examples

Basic usage:

assert!('a'.is_alphabetic());
assert!('京'.is_alphabetic());

let c = '💝';
// love is many things, but it is not alphabetic
assert!(!c.is_alphabetic());

pub fn is_lowercase(self) -> bool

Returns true if this char has the Lowercase property.

Lowercase is described in Chapter 4 (Character Properties) of the Unicode Standard and specified in the Unicode Character Database DerivedCoreProperties.txt.

Examples

Basic usage:

assert!('a'.is_lowercase());
assert!('δ'.is_lowercase());
assert!(!'A'.is_lowercase());
assert!(!'Δ'.is_lowercase());

// The various Chinese scripts and punctuation do not have case, and so:
assert!(!'中'.is_lowercase());
assert!(!' '.is_lowercase());

In a const context:

#![feature(const_unicode_case_lookup)]
const CAPITAL_DELTA_IS_LOWERCASE: bool = 'Δ'.is_lowercase();
assert!(!CAPITAL_DELTA_IS_LOWERCASE);

pub fn is_uppercase(self) -> bool

Returns true if this char has the Uppercase property.

Uppercase is described in Chapter 4 (Character Properties) of the Unicode Standard and specified in the Unicode Character Database DerivedCoreProperties.txt.

Examples

Basic usage:

assert!(!'a'.is_uppercase());
assert!(!'δ'.is_uppercase());
assert!('A'.is_uppercase());
assert!('Δ'.is_uppercase());

// The various Chinese scripts and punctuation do not have case, and so:
assert!(!'中'.is_uppercase());
assert!(!' '.is_uppercase());

In a const context:

#![feature(const_unicode_case_lookup)]
const CAPITAL_DELTA_IS_UPPERCASE: bool = 'Δ'.is_uppercase();
assert!(CAPITAL_DELTA_IS_UPPERCASE);

pub fn is_whitespace(self) -> bool

Returns true if this char has the White_Space property.

White_Space is specified in the Unicode Character Database PropList.txt.

Examples

Basic usage:

assert!(' '.is_whitespace());

// line break
assert!('\n'.is_whitespace());

// a non-breaking space
assert!('\u{A0}'.is_whitespace());

assert!(!'越'.is_whitespace());

pub fn is_alphanumeric(self) -> bool

Returns true if this char satisfies either is_alphabetic() or is_numeric().

Examples

Basic usage:

assert!('٣'.is_alphanumeric());
assert!('7'.is_alphanumeric());
assert!('৬'.is_alphanumeric());
assert!('¾'.is_alphanumeric());
assert!('①'.is_alphanumeric());
assert!('K'.is_alphanumeric());
assert!('و'.is_alphanumeric());
assert!('藏'.is_alphanumeric());

pub fn is_control(self) -> bool

Returns true if this char has the general category for control codes.

Control codes (code points with the general category of Cc) are described in Chapter 4 (Character Properties) of the Unicode Standard and specified in the Unicode Character Database UnicodeData.txt.

Examples

Basic usage:

// U+009C, STRING TERMINATOR
assert!('œ'.is_control());
assert!(!'q'.is_control());

pub fn is_numeric(self) -> bool

Returns true if this char has one of the general categories for numbers.

The general categories for numbers (Nd for decimal digits, Nl for letter-like numeric characters, and No for other numeric characters) are specified in the Unicode Character Database UnicodeData.txt.

This method doesn’t cover everything that could be considered a number, e.g. ideographic numbers like ‘三’. If you want everything including characters with overlapping purposes then you might want to use a unicode or language-processing library that exposes the appropriate character properties instead of looking at the unicode categories.

If you want to parse ASCII decimal digits (0-9) or ASCII base-N, use is_ascii_digit or is_digit instead.

Examples

Basic usage:

assert!('٣'.is_numeric());
assert!('7'.is_numeric());
assert!('৬'.is_numeric());
assert!('¾'.is_numeric());
assert!('①'.is_numeric());
assert!(!'K'.is_numeric());
assert!(!'و'.is_numeric());
assert!(!'藏'.is_numeric());
assert!(!'三'.is_numeric());

pub fn to_lowercase(self) -> ToLowercase

Returns an iterator that yields the lowercase mapping of this char as one or more chars.

If this char does not have a lowercase mapping, the iterator yields the same char.

If this char has a one-to-one lowercase mapping given by the Unicode Character Database UnicodeData.txt, the iterator yields that char.

If this char requires special considerations (e.g. multiple chars) the iterator yields the char(s) given by SpecialCasing.txt.

This operation performs an unconditional mapping without tailoring. That is, the conversion is independent of context and language.

In the Unicode Standard, Chapter 4 (Character Properties) discusses case mapping in general and Chapter 3 (Conformance) discusses the default algorithm for case conversion.

Examples

As an iterator:

for c in 'İ'.to_lowercase() {
    print!("{c}");
}
println!();

Using println! directly:

println!("{}", 'İ'.to_lowercase());

Both are equivalent to:

println!("i\u{307}");

Using to_string:

assert_eq!('C'.to_lowercase().to_string(), "c");

// Sometimes the result is more than one character:
assert_eq!('İ'.to_lowercase().to_string(), "i\u{307}");

// Characters that do not have both uppercase and lowercase
// convert into themselves.
assert_eq!('山'.to_lowercase().to_string(), "山");

pub fn to_uppercase(self) -> ToUppercase

Returns an iterator that yields the uppercase mapping of this char as one or more chars.

If this char does not have an uppercase mapping, the iterator yields the same char.

If this char has a one-to-one uppercase mapping given by the Unicode Character Database UnicodeData.txt, the iterator yields that char.

If this char requires special considerations (e.g. multiple chars) the iterator yields the char(s) given by SpecialCasing.txt.

This operation performs an unconditional mapping without tailoring. That is, the conversion is independent of context and language.

In the Unicode Standard, Chapter 4 (Character Properties) discusses case mapping in general and Chapter 3 (Conformance) discusses the default algorithm for case conversion.

Examples

As an iterator:

for c in 'ß'.to_uppercase() {
    print!("{c}");
}
println!();

Using println! directly:

println!("{}", 'ß'.to_uppercase());

Both are equivalent to:

println!("SS");

Using to_string:

assert_eq!('c'.to_uppercase().to_string(), "C");

// Sometimes the result is more than one character:
assert_eq!('ß'.to_uppercase().to_string(), "SS");

// Characters that do not have both uppercase and lowercase
// convert into themselves.
assert_eq!('山'.to_uppercase().to_string(), "山");

Note on locale

In Turkish, the equivalent of ‘i’ in Latin has five forms instead of two:

• ‘Dotless’: I / ı, sometimes written ï
• ‘Dotted’: İ / i

Note that the lowercase dotted ‘i’ is the same as the Latin. Therefore:

let upper_i = 'i'.to_uppercase().to_string();

The value of upper_i here relies on the language of the text: if we’re in en-US, it should be "I", but if we’re in tr_TR, it should be "İ". to_uppercase() does not take this into account, and so:

let upper_i = 'i'.to_uppercase().to_string();

assert_eq!(upper_i, "I");

holds across languages.

pub const fn is_ascii(&self) -> bool

Checks if the value is within the ASCII range.

Examples

let ascii = 'a';
let non_ascii = '❤';

assert!(ascii.is_ascii());
assert!(!non_ascii.is_ascii());

pub const fn as_ascii(&self) -> Option<AsciiChar>

🔬This is a nightly-only experimental API. (ascii_char #110998)

Returns Some if the value is within the ASCII range, or None if it’s not.

This is preferred to Self::is_ascii when you’re passing the value along to something else that can take ascii::Char rather than needing to check again for itself whether the value is in ASCII.

pub const fn to_ascii_uppercase(&self) -> char

Makes a copy of the value in its ASCII upper case equivalent.

ASCII letters ‘a’ to ‘z’ are mapped to ‘A’ to ‘Z’, but non-ASCII letters are unchanged.

To uppercase the value in-place, use make_ascii_uppercase().

To uppercase ASCII characters in addition to non-ASCII characters, use to_uppercase().

Examples

let ascii = 'a';
let non_ascii = '❤';

assert_eq!('A', ascii.to_ascii_uppercase());
assert_eq!('❤', non_ascii.to_ascii_uppercase());

pub const fn to_ascii_lowercase(&self) -> char

Makes a copy of the value in its ASCII lower case equivalent.

ASCII letters ‘A’ to ‘Z’ are mapped to ‘a’ to ‘z’, but non-ASCII letters are unchanged.

To lowercase the value in-place, use make_ascii_lowercase().

To lowercase ASCII characters in addition to non-ASCII characters, use to_lowercase().

Examples

let ascii = 'A';
let non_ascii = '❤';

assert_eq!('a', ascii.to_ascii_lowercase());
assert_eq!('❤', non_ascii.to_ascii_lowercase());

pub const fn eq_ignore_ascii_case(&self, other: &char) -> bool

Checks that two values are an ASCII case-insensitive match.

Equivalent to to_ascii_lowercase(a) == to_ascii_lowercase(b).

Examples

let upper_a = 'A';
let lower_a = 'a';
let lower_z = 'z';

assert!(upper_a.eq_ignore_ascii_case(&lower_a));
assert!(upper_a.eq_ignore_ascii_case(&upper_a));
assert!(!upper_a.eq_ignore_ascii_case(&lower_z));

pub const fn make_ascii_uppercase(&mut self)

Converts this type to its ASCII upper case equivalent in-place.

ASCII letters ‘a’ to ‘z’ are mapped to ‘A’ to ‘Z’, but non-ASCII letters are unchanged.

To return a new uppercased value without modifying the existing one, use to_ascii_uppercase().

Examples

let mut ascii = 'a';

ascii.make_ascii_uppercase();

assert_eq!('A', ascii);

pub const fn make_ascii_lowercase(&mut self)

Converts this type to its ASCII lower case equivalent in-place.

ASCII letters ‘A’ to ‘Z’ are mapped to ‘a’ to ‘z’, but non-ASCII letters are unchanged.

To return a new lowercased value without modifying the existing one, use to_ascii_lowercase().

Examples

let mut ascii = 'A';

ascii.make_ascii_lowercase();

assert_eq!('a', ascii);

pub const fn is_ascii_alphabetic(&self) -> bool

Checks if the value is an ASCII alphabetic character:

• U+0041 ‘A’ ..= U+005A ‘Z’, or
• U+0061 ‘a’ ..= U+007A ‘z’.

Examples

let uppercase_a = 'A';
let uppercase_g = 'G';
let a = 'a';
let g = 'g';
let zero = '0';
let percent = '%';
let space = ' ';
let lf = '\n';
let esc = '\x1b';

assert!(uppercase_a.is_ascii_alphabetic());
assert!(uppercase_g.is_ascii_alphabetic());
assert!(a.is_ascii_alphabetic());
assert!(g.is_ascii_alphabetic());
assert!(!zero.is_ascii_alphabetic());
assert!(!percent.is_ascii_alphabetic());
assert!(!space.is_ascii_alphabetic());
assert!(!lf.is_ascii_alphabetic());
assert!(!esc.is_ascii_alphabetic());

pub const fn is_ascii_uppercase(&self) -> bool

Checks if the value is an ASCII uppercase character: U+0041 ‘A’ ..= U+005A ‘Z’.

Examples

let uppercase_a = 'A';
let uppercase_g = 'G';
let a = 'a';
let g = 'g';
let zero = '0';
let percent = '%';
let space = ' ';
let lf = '\n';
let esc = '\x1b';

assert!(uppercase_a.is_ascii_uppercase());
assert!(uppercase_g.is_ascii_uppercase());
assert!(!a.is_ascii_uppercase());
assert!(!g.is_ascii_uppercase());
assert!(!zero.is_ascii_uppercase());
assert!(!percent.is_ascii_uppercase());
assert!(!space.is_ascii_uppercase());
assert!(!lf.is_ascii_uppercase());
assert!(!esc.is_ascii_uppercase());

pub const fn is_ascii_lowercase(&self) -> bool

Checks if the value is an ASCII lowercase character: U+0061 ‘a’ ..= U+007A ‘z’.

Examples

let uppercase_a = 'A';
let uppercase_g = 'G';
let a = 'a';
let g = 'g';
let zero = '0';
let percent = '%';
let space = ' ';
let lf = '\n';
let esc = '\x1b';

assert!(!uppercase_a.is_ascii_lowercase());
assert!(!uppercase_g.is_ascii_lowercase());
assert!(a.is_ascii_lowercase());
assert!(g.is_ascii_lowercase());
assert!(!zero.is_ascii_lowercase());
assert!(!percent.is_ascii_lowercase());
assert!(!space.is_ascii_lowercase());
assert!(!lf.is_ascii_lowercase());
assert!(!esc.is_ascii_lowercase());

pub const fn is_ascii_alphanumeric(&self) -> bool

Checks if the value is an ASCII alphanumeric character:

• U+0041 ‘A’ ..= U+005A ‘Z’, or
• U+0061 ‘a’ ..= U+007A ‘z’, or
• U+0030 ‘0’ ..= U+0039 ‘9’.

Examples

let uppercase_a = 'A';
let uppercase_g = 'G';
let a = 'a';
let g = 'g';
let zero = '0';
let percent = '%';
let space = ' ';
let lf = '\n';
let esc = '\x1b';

assert!(uppercase_a.is_ascii_alphanumeric());
assert!(uppercase_g.is_ascii_alphanumeric());
assert!(a.is_ascii_alphanumeric());
assert!(g.is_ascii_alphanumeric());
assert!(zero.is_ascii_alphanumeric());
assert!(!percent.is_ascii_alphanumeric());
assert!(!space.is_ascii_alphanumeric());
assert!(!lf.is_ascii_alphanumeric());
assert!(!esc.is_ascii_alphanumeric());

pub const fn is_ascii_digit(&self) -> bool

Checks if the value is an ASCII decimal digit: U+0030 ‘0’ ..= U+0039 ‘9’.

Examples

let uppercase_a = 'A';
let uppercase_g = 'G';
let a = 'a';
let g = 'g';
let zero = '0';
let percent = '%';
let space = ' ';
let lf = '\n';
let esc = '\x1b';

assert!(!uppercase_a.is_ascii_digit());
assert!(!uppercase_g.is_ascii_digit());
assert!(!a.is_ascii_digit());
assert!(!g.is_ascii_digit());
assert!(zero.is_ascii_digit());
assert!(!percent.is_ascii_digit());
assert!(!space.is_ascii_digit());
assert!(!lf.is_ascii_digit());
assert!(!esc.is_ascii_digit());

pub const fn is_ascii_octdigit(&self) -> bool

🔬This is a nightly-only experimental API. (is_ascii_octdigit #101288)

Checks if the value is an ASCII octal digit: U+0030 ‘0’ ..= U+0037 ‘7’.

Examples

#![feature(is_ascii_octdigit)]

let uppercase_a = 'A';
let a = 'a';
let zero = '0';
let seven = '7';
let nine = '9';
let percent = '%';
let lf = '\n';

assert!(!uppercase_a.is_ascii_octdigit());
assert!(!a.is_ascii_octdigit());
assert!(zero.is_ascii_octdigit());
assert!(seven.is_ascii_octdigit());
assert!(!nine.is_ascii_octdigit());
assert!(!percent.is_ascii_octdigit());
assert!(!lf.is_ascii_octdigit());

pub const fn is_ascii_hexdigit(&self) -> bool

Checks if the value is an ASCII hexadecimal digit:

• U+0030 ‘0’ ..= U+0039 ‘9’, or
• U+0041 ‘A’ ..= U+0046 ‘F’, or
• U+0061 ‘a’ ..= U+0066 ‘f’.

Examples

let uppercase_a = 'A';
let uppercase_g = 'G';
let a = 'a';
let g = 'g';
let zero = '0';
let percent = '%';
let space = ' ';
let lf = '\n';
let esc = '\x1b';

assert!(uppercase_a.is_ascii_hexdigit());
assert!(!uppercase_g.is_ascii_hexdigit());
assert!(a.is_ascii_hexdigit());
assert!(!g.is_ascii_hexdigit());
assert!(zero.is_ascii_hexdigit());
assert!(!percent.is_ascii_hexdigit());
assert!(!space.is_ascii_hexdigit());
assert!(!lf.is_ascii_hexdigit());
assert!(!esc.is_ascii_hexdigit());

pub const fn is_ascii_punctuation(&self) -> bool

Checks if the value is an ASCII punctuation character:

• U+0021 ..= U+002F ! " # $ % & ' ( ) * + , - . /, or
• U+003A ..= U+0040 : ; < = > ? @, or
• U+005B ..= U+0060 [ \ ] ^ _ ` , or
• U+007B ..= U+007E { | } ~

Examples

let uppercase_a = 'A';
let uppercase_g = 'G';
let a = 'a';
let g = 'g';
let zero = '0';
let percent = '%';
let space = ' ';
let lf = '\n';
let esc = '\x1b';

assert!(!uppercase_a.is_ascii_punctuation());
assert!(!uppercase_g.is_ascii_punctuation());
assert!(!a.is_ascii_punctuation());
assert!(!g.is_ascii_punctuation());
assert!(!zero.is_ascii_punctuation());
assert!(percent.is_ascii_punctuation());
assert!(!space.is_ascii_punctuation());
assert!(!lf.is_ascii_punctuation());
assert!(!esc.is_ascii_punctuation());

pub const fn is_ascii_graphic(&self) -> bool

Checks if the value is an ASCII graphic character: U+0021 ‘!’ ..= U+007E ‘~’.

Examples

let uppercase_a = 'A';
let uppercase_g = 'G';
let a = 'a';
let g = 'g';
let zero = '0';
let percent = '%';
let space = ' ';
let lf = '\n';
let esc = '\x1b';

assert!(uppercase_a.is_ascii_graphic());
assert!(uppercase_g.is_ascii_graphic());
assert!(a.is_ascii_graphic());
assert!(g.is_ascii_graphic());
assert!(zero.is_ascii_graphic());
assert!(percent.is_ascii_graphic());
assert!(!space.is_ascii_graphic());
assert!(!lf.is_ascii_graphic());
assert!(!esc.is_ascii_graphic());

pub const fn is_ascii_whitespace(&self) -> bool

Checks if the value is an ASCII whitespace character: U+0020 SPACE, U+0009 HORIZONTAL TAB, U+000A LINE FEED, U+000C FORM FEED, or U+000D CARRIAGE RETURN.

Rust uses the WhatWG Infra Standard’s definition of ASCII whitespace. There are several other definitions in wide use. For instance, the POSIX locale includes U+000B VERTICAL TAB as well as all the above characters, but—from the very same specification—the default rule for “field splitting” in the Bourne shell considers only SPACE, HORIZONTAL TAB, and LINE FEED as whitespace.

If you are writing a program that will process an existing file format, check what that format’s definition of whitespace is before using this function.

Examples

let uppercase_a = 'A';
let uppercase_g = 'G';
let a = 'a';
let g = 'g';
let zero = '0';
let percent = '%';
let space = ' ';
let lf = '\n';
let esc = '\x1b';

assert!(!uppercase_a.is_ascii_whitespace());
assert!(!uppercase_g.is_ascii_whitespace());
assert!(!a.is_ascii_whitespace());
assert!(!g.is_ascii_whitespace());
assert!(!zero.is_ascii_whitespace());
assert!(!percent.is_ascii_whitespace());
assert!(space.is_ascii_whitespace());
assert!(lf.is_ascii_whitespace());
assert!(!esc.is_ascii_whitespace());

pub const fn is_ascii_control(&self) -> bool

Checks if the value is an ASCII control character: U+0000 NUL ..= U+001F UNIT SEPARATOR, or U+007F DELETE. Note that most ASCII whitespace characters are control characters, but SPACE is not.

Examples

let uppercase_a = 'A';
let uppercase_g = 'G';
let a = 'a';
let g = 'g';
let zero = '0';
let percent = '%';
let space = ' ';
let lf = '\n';
let esc = '\x1b';

assert!(!uppercase_a.is_ascii_control());
assert!(!uppercase_g.is_ascii_control());
assert!(!a.is_ascii_control());
assert!(!g.is_ascii_control());
assert!(!zero.is_ascii_control());
assert!(!percent.is_ascii_control());
assert!(!space.is_ascii_control());
assert!(lf.is_ascii_control());
assert!(esc.is_ascii_control());

Trait Implementations

impl AsciiExt for char

type Owned = char

👎Deprecated since 1.26.0: use inherent methods instead

Container type for copied ASCII characters.

fn is_ascii(&self) -> bool

👎Deprecated since 1.26.0: use inherent methods instead

Checks if the value is within the ASCII range.

fn to_ascii_uppercase(&self) -> Self::Owned

👎Deprecated since 1.26.0: use inherent methods instead

Makes a copy of the value in its ASCII upper case equivalent.

fn to_ascii_lowercase(&self) -> Self::Owned

👎Deprecated since 1.26.0: use inherent methods instead

Makes a copy of the value in its ASCII lower case equivalent.

fn eq_ignore_ascii_case(&self, o: &Self) -> bool

👎Deprecated since 1.26.0: use inherent methods instead

Checks that two values are an ASCII case-insensitive match.

fn make_ascii_uppercase(&mut self)

👎Deprecated since 1.26.0: use inherent methods instead

Converts this type to its ASCII upper case equivalent in-place.

fn make_ascii_lowercase(&mut self)

👎Deprecated since 1.26.0: use inherent methods instead

Converts this type to its ASCII lower case equivalent in-place.

impl Clone for char

fn clone(&self) -> char

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for char

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for char

fn default() -> char

Returns the default value of \x00

impl Display for char

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<'a> Extend<&'a char> for String

fn extend<I>(&mut self, iter: I)

where I: IntoIterator<Item = &'a char>,

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, _: &'a char)

🔬This is a nightly-only experimental API. (extend_one #72631)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one #72631)

Reserves capacity in a collection for the given number of additional elements.

impl Extend<char> for String

fn extend<I>(&mut self, iter: I)

where I: IntoIterator<Item = char>,

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, c: char)

🔬This is a nightly-only experimental API. (extend_one #72631)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one #72631)

Reserves capacity in a collection for the given number of additional elements.

impl From<AsciiChar> for char

fn from(chr: AsciiChar) -> char

Converts to this type from the input type.

impl From<char> for String

fn from(c: char) -> String

Allocates an owned String from a single character.

Example

let c: char = 'a';
let s: String = String::from(c);
assert_eq!("a", &s[..]);

impl From<char> for u128

fn from(c: char) -> u128

Converts a char into a u128.

Examples

use std::mem;

let c = '⚙';
let u = u128::from(c);
assert!(16 == mem::size_of_val(&u))

impl From<char> for u32

fn from(c: char) -> u32

Converts a char into a u32.

Examples

use std::mem;

let c = 'c';
let u = u32::from(c);
assert!(4 == mem::size_of_val(&u))

impl From<char> for u64

fn from(c: char) -> u64

Converts a char into a u64.

Examples

use std::mem;

let c = '👤';
let u = u64::from(c);
assert!(8 == mem::size_of_val(&u))

impl From<u8> for char

Maps a byte in 0x00..=0xFF to a char whose code point has the same value, in U+0000..=U+00FF.

Unicode is designed such that this effectively decodes bytes with the character encoding that IANA calls ISO-8859-1. This encoding is compatible with ASCII.

Note that this is different from ISO/IEC 8859-1 a.k.a. ISO 8859-1 (with one less hyphen), which leaves some “blanks”, byte values that are not assigned to any character. ISO-8859-1 (the IANA one) assigns them to the C0 and C1 control codes.

Note that this is also different from Windows-1252 a.k.a. code page 1252, which is a superset ISO/IEC 8859-1 that assigns some (not all!) blanks to punctuation and various Latin characters.

To confuse things further, on the Web ascii, iso-8859-1, and windows-1252 are all aliases for a superset of Windows-1252 that fills the remaining blanks with corresponding C0 and C1 control codes.

fn from(i: u8) -> char

Converts a u8 into a char.

Examples

use std::mem;

let u = 32 as u8;
let c = char::from(u);
assert!(4 == mem::size_of_val(&c))

impl<'a> FromIterator<&'a char> for Box<str>

fn from_iter<T>(iter: T) -> Box<str>

where T: IntoIterator<Item = &'a char>,

Creates a value from an iterator.

impl<'a> FromIterator<&'a char> for String

fn from_iter<I>(iter: I) -> String

where I: IntoIterator<Item = &'a char>,

Creates a value from an iterator.

impl FromIterator<char> for Box<str>

fn from_iter<T>(iter: T) -> Box<str>

where T: IntoIterator<Item = char>,

Creates a value from an iterator.

impl<'a> FromIterator<char> for Cow<'a, str>

fn from_iter<I>(it: I) -> Cow<'a, str>

where I: IntoIterator<Item = char>,

Creates a value from an iterator.

impl FromIterator<char> for String

fn from_iter<I>(iter: I) -> String

where I: IntoIterator<Item = char>,

Creates a value from an iterator.

impl FromStr for char

type Err = ParseCharError

The associated error which can be returned from parsing.

fn from_str(s: &str) -> Result<char, <char as FromStr>::Err>

Parses a string s to return a value of this type.

impl Hash for char

fn hash<H>(&self, state: &mut H)

where H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for char

fn cmp(&self, other: &char) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for char

fn eq(&self, other: &char) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &char) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for char

fn partial_cmp(&self, other: &char) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &char) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &char) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &char) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &char) -> bool

Tests greater than (for self and other) and is used by the > operator.

impl Pattern for char

Searches for chars that are equal to a given char.

Examples

assert_eq!("Hello world".find('o'), Some(4));

type Searcher<'a> = CharSearcher<'a>

🔬This is a nightly-only experimental API. (pattern #27721)

Associated searcher for this pattern

fn into_searcher(self, haystack: &str) -> <char as Pattern>::Searcher<'_>

🔬This is a nightly-only experimental API. (pattern #27721)

Constructs the associated searcher from self and the haystack to search in.

fn is_contained_in(self, haystack: &str) -> bool

🔬This is a nightly-only experimental API. (pattern #27721)

Checks whether the pattern matches anywhere in the haystack

fn is_prefix_of(self, haystack: &str) -> bool

🔬This is a nightly-only experimental API. (pattern #27721)

Checks whether the pattern matches at the front of the haystack

fn strip_prefix_of(self, haystack: &str) -> Option<&str>

🔬This is a nightly-only experimental API. (pattern #27721)

Removes the pattern from the front of haystack, if it matches.

fn is_suffix_of<'a>(self, haystack: &'a str) -> bool

where <char as Pattern>::Searcher<'a>: ReverseSearcher<'a>,

🔬This is a nightly-only experimental API. (pattern #27721)

Checks whether the pattern matches at the back of the haystack

fn strip_suffix_of<'a>(self, haystack: &'a str) -> Option<&'a str>

where <char as Pattern>::Searcher<'a>: ReverseSearcher<'a>,

🔬This is a nightly-only experimental API. (pattern #27721)

Removes the pattern from the back of haystack, if it matches.

fn as_utf8_pattern(&self) -> Option<Utf8Pattern<'_>>

🔬This is a nightly-only experimental API. (pattern #27721)

Returns the pattern as utf-8 bytes if possible.

impl Step for char

fn steps_between(_: &char, _: &char) -> Option<usize>

🔬This is a nightly-only experimental API. (step_trait #42168)

Returns the number of successor steps required to get from start to end.

fn forward_checked(start: char, count: usize) -> Option<char>

🔬This is a nightly-only experimental API. (step_trait #42168)

Returns the value that would be obtained by taking the successor of self count times.

fn backward_checked(start: char, count: usize) -> Option<char>

🔬This is a nightly-only experimental API. (step_trait #42168)

Returns the value that would be obtained by taking the predecessor of self count times.

unsafe fn forward_unchecked(start: char, count: usize) -> char

🔬This is a nightly-only experimental API. (step_trait #42168)

Returns the value that would be obtained by taking the successor of self count times.

unsafe fn backward_unchecked(start: char, count: usize) -> char

🔬This is a nightly-only experimental API. (step_trait #42168)

Returns the value that would be obtained by taking the predecessor of self count times.

fn forward(start: Self, count: usize) -> Self

🔬This is a nightly-only experimental API. (step_trait #42168)

Returns the value that would be obtained by taking the successor of self count times.

fn backward(start: Self, count: usize) -> Self

🔬This is a nightly-only experimental API. (step_trait #42168)

Returns the value that would be obtained by taking the predecessor of self count times.

impl TryFrom<char> for u16

Maps a char with code point in U+0000..=U+FFFF to a u16 in 0x0000..=0xFFFF with same value, failing if the code point is greater than U+FFFF.

This corresponds to the UCS-2 encoding, as specified in ISO/IEC 10646:2003.

fn try_from(c: char) -> Result<u16, <u16 as TryFrom<char>>::Error>

Tries to convert a char into a u16.

Examples

let trans_rights = '⚧'; // U+26A7
let ninjas = '🥷'; // U+1F977
assert_eq!(u16::try_from(trans_rights), Ok(0x26A7_u16));
assert!(u16::try_from(ninjas).is_err());

type Error = TryFromCharError

The type returned in the event of a conversion error.

impl TryFrom<char> for u8

Maps a char with code point in U+0000..=U+00FF to a byte in 0x00..=0xFF with same value, failing if the code point is greater than U+00FF.

See impl From<u8> for char for details on the encoding.

fn try_from(c: char) -> Result<u8, <u8 as TryFrom<char>>::Error>

Tries to convert a char into a u8.

Examples

let a = 'ÿ'; // U+00FF
let b = 'Ā'; // U+0100
assert_eq!(u8::try_from(a), Ok(0xFF_u8));
assert!(u8::try_from(b).is_err());

type Error = TryFromCharError

The type returned in the event of a conversion error.

impl TryFrom<u32> for char

type Error = CharTryFromError

The type returned in the event of a conversion error.

fn try_from(i: u32) -> Result<char, <char as TryFrom<u32>>::Error>

Performs the conversion.

impl ConstParamTy_ for char

impl Copy for char

impl Eq for char

impl StructuralPartialEq for char

impl TrustedStep for char

impl UnsizedConstParamTy for char