Struct std::ffi::OsStr

pub struct OsStr { /* private fields */ }

Borrowed reference to an OS string (see OsString).

This type represents a borrowed reference to a string in the operating system’s preferred representation.

&OsStr is to OsString as &str is to String: the former in each pair are borrowed references; the latter are owned strings.

See the module’s toplevel documentation about conversions for a discussion on the traits which OsStr implements for conversions from/to native representations.

Implementations

impl OsStr

pub fn new<S: AsRef<OsStr> + ?Sized>(s: &S) -> &OsStr

Coerces into an OsStr slice.

Examples

use std::ffi::OsStr;

let os_str = OsStr::new("foo");

pub unsafe fn from_encoded_bytes_unchecked(bytes: &[u8]) -> &Self

Converts a slice of bytes to an OS string slice without checking that the string contains valid OsStr-encoded data.

The byte encoding is an unspecified, platform-specific, self-synchronizing superset of UTF-8. By being a self-synchronizing superset of UTF-8, this encoding is also a superset of 7-bit ASCII.

See the module’s toplevel documentation about conversions for safe, cross-platform conversions from/to native representations.

Safety

As the encoding is unspecified, callers must pass in bytes that originated as a mixture of validated UTF-8 and bytes from OsStr::as_encoded_bytes from within the same Rust version built for the same target platform. For example, reconstructing an OsStr from bytes sent over the network or stored in a file will likely violate these safety rules.

Due to the encoding being self-synchronizing, the bytes from OsStr::as_encoded_bytes can be split either immediately before or immediately after any valid non-empty UTF-8 substring.

Example

use std::ffi::OsStr;

let os_str = OsStr::new("Mary had a little lamb");
let bytes = os_str.as_encoded_bytes();
let words = bytes.split(|b| *b == b' ');
let words: Vec<&OsStr> = words.map(|word| {
    // SAFETY:
    // - Each `word` only contains content that originated from `OsStr::as_encoded_bytes`
    // - Only split with ASCII whitespace which is a non-empty UTF-8 substring
    unsafe { OsStr::from_encoded_bytes_unchecked(word) }
}).collect();

pub fn to_str(&self) -> Option<&str>

Yields a &str slice if the OsStr is valid Unicode.

This conversion may entail doing a check for UTF-8 validity.

Examples

use std::ffi::OsStr;

let os_str = OsStr::new("foo");
assert_eq!(os_str.to_str(), Some("foo"));

pub fn to_string_lossy(&self) -> Cow<'_, str>

Converts an OsStr to a Cow<str>.

Any non-Unicode sequences are replaced with U+FFFD REPLACEMENT CHARACTER.

Examples

Calling to_string_lossy on an OsStr with invalid unicode:

// Note, due to differences in how Unix and Windows represent strings,
// we are forced to complicate this example, setting up example `OsStr`s
// with different source data and via different platform extensions.
// Understand that in reality you could end up with such example invalid
// sequences simply through collecting user command line arguments, for
// example.

#[cfg(unix)] {
    use std::ffi::OsStr;
    use std::os::unix::ffi::OsStrExt;

    // Here, the values 0x66 and 0x6f correspond to 'f' and 'o'
    // respectively. The value 0x80 is a lone continuation byte, invalid
    // in a UTF-8 sequence.
    let source = [0x66, 0x6f, 0x80, 0x6f];
    let os_str = OsStr::from_bytes(&source[..]);

    assert_eq!(os_str.to_string_lossy(), "fo�o");
}
#[cfg(windows)] {
    use std::ffi::OsString;
    use std::os::windows::prelude::*;

    // Here the values 0x0066 and 0x006f correspond to 'f' and 'o'
    // respectively. The value 0xD800 is a lone surrogate half, invalid
    // in a UTF-16 sequence.
    let source = [0x0066, 0x006f, 0xD800, 0x006f];
    let os_string = OsString::from_wide(&source[..]);
    let os_str = os_string.as_os_str();

    assert_eq!(os_str.to_string_lossy(), "fo�o");
}

pub fn to_os_string(&self) -> OsString

Copies the slice into an owned OsString.

Examples

use std::ffi::{OsStr, OsString};

let os_str = OsStr::new("foo");
let os_string = os_str.to_os_string();
assert_eq!(os_string, OsString::from("foo"));

pub fn is_empty(&self) -> bool

Checks whether the OsStr is empty.

Examples

use std::ffi::OsStr;

let os_str = OsStr::new("");
assert!(os_str.is_empty());

let os_str = OsStr::new("foo");
assert!(!os_str.is_empty());

pub fn len(&self) -> usize

Returns the length of this OsStr.

Note that this does not return the number of bytes in the string in OS string form.

The length returned is that of the underlying storage used by OsStr. As discussed in the OsString introduction, OsString and OsStr store strings in a form best suited for cheap inter-conversion between native-platform and Rust string forms, which may differ significantly from both of them, including in storage size and encoding.

This number is simply useful for passing to other methods, like OsString::with_capacity to avoid reallocations.

See the main OsString documentation information about encoding and capacity units.

Examples

use std::ffi::OsStr;

let os_str = OsStr::new("");
assert_eq!(os_str.len(), 0);

let os_str = OsStr::new("foo");
assert_eq!(os_str.len(), 3);

pub fn into_os_string(self: Box<OsStr>) -> OsString

Converts a Box<OsStr> into an OsString without copying or allocating.

pub fn as_encoded_bytes(&self) -> &[u8]

Converts an OS string slice to a byte slice. To convert the byte slice back into an OS string slice, use the OsStr::from_encoded_bytes_unchecked function.

The byte encoding is an unspecified, platform-specific, self-synchronizing superset of UTF-8. By being a self-synchronizing superset of UTF-8, this encoding is also a superset of 7-bit ASCII.

Note: As the encoding is unspecified, any sub-slice of bytes that is not valid UTF-8 should be treated as opaque and only comparable within the same Rust version built for the same target platform. For example, sending the slice over the network or storing it in a file will likely result in incompatible byte slices. See OsString for more encoding details and std::ffi for platform-specific, specified conversions.

pub fn slice_encoded_bytes<R: RangeBounds<usize>>(&self, range: R) -> &Self

🔬This is a nightly-only experimental API. (os_str_slice #118485)

Takes a substring based on a range that corresponds to the return value of OsStr::as_encoded_bytes.

The range’s start and end must lie on valid OsStr boundaries. A valid OsStr boundary is one of:

• The start of the string
• The end of the string
• Immediately before a valid non-empty UTF-8 substring
• Immediately after a valid non-empty UTF-8 substring

Panics

Panics if range does not lie on valid OsStr boundaries or if it exceeds the end of the string.

Example

#![feature(os_str_slice)]

use std::ffi::OsStr;

let os_str = OsStr::new("foo=bar");
let bytes = os_str.as_encoded_bytes();
if let Some(index) = bytes.iter().position(|b| *b == b'=') {
    let key = os_str.slice_encoded_bytes(..index);
    let value = os_str.slice_encoded_bytes(index + 1..);
    assert_eq!(key, "foo");
    assert_eq!(value, "bar");
}

pub fn make_ascii_lowercase(&mut self)

Converts this string to its ASCII lower case equivalent in-place.

ASCII letters ‘A’ to ‘Z’ are mapped to ‘a’ to ‘z’, but non-ASCII letters are unchanged.

To return a new lowercased value without modifying the existing one, use OsStr::to_ascii_lowercase.

Examples

use std::ffi::OsString;

let mut s = OsString::from("GRÜßE, JÜRGEN ❤");

s.make_ascii_lowercase();

assert_eq!("grÜße, jÜrgen ❤", s);

pub fn make_ascii_uppercase(&mut self)

Converts this string to its ASCII upper case equivalent in-place.

ASCII letters ‘a’ to ‘z’ are mapped to ‘A’ to ‘Z’, but non-ASCII letters are unchanged.

To return a new uppercased value without modifying the existing one, use OsStr::to_ascii_uppercase.

Examples

use std::ffi::OsString;

let mut s = OsString::from("Grüße, Jürgen ❤");

s.make_ascii_uppercase();

assert_eq!("GRüßE, JüRGEN ❤", s);

pub fn to_ascii_lowercase(&self) -> OsString

Returns a copy of this string where each character is mapped to its ASCII lower case equivalent.

ASCII letters ‘A’ to ‘Z’ are mapped to ‘a’ to ‘z’, but non-ASCII letters are unchanged.

To lowercase the value in-place, use OsStr::make_ascii_lowercase.

Examples

use std::ffi::OsString;
let s = OsString::from("Grüße, Jürgen ❤");

assert_eq!("grüße, jürgen ❤", s.to_ascii_lowercase());

pub fn to_ascii_uppercase(&self) -> OsString

Returns a copy of this string where each character is mapped to its ASCII upper case equivalent.

ASCII letters ‘a’ to ‘z’ are mapped to ‘A’ to ‘Z’, but non-ASCII letters are unchanged.

To uppercase the value in-place, use OsStr::make_ascii_uppercase.

Examples

use std::ffi::OsString;
let s = OsString::from("Grüße, Jürgen ❤");

assert_eq!("GRüßE, JüRGEN ❤", s.to_ascii_uppercase());

pub fn is_ascii(&self) -> bool

Checks if all characters in this string are within the ASCII range.

Examples

use std::ffi::OsString;

let ascii = OsString::from("hello!\n");
let non_ascii = OsString::from("Grüße, Jürgen ❤");

assert!(ascii.is_ascii());
assert!(!non_ascii.is_ascii());

pub fn eq_ignore_ascii_case<S: AsRef<OsStr>>(&self, other: S) -> bool

Checks that two strings are an ASCII case-insensitive match.

Same as to_ascii_lowercase(a) == to_ascii_lowercase(b), but without allocating and copying temporaries.

Examples

use std::ffi::OsString;

assert!(OsString::from("Ferris").eq_ignore_ascii_case("FERRIS"));
assert!(OsString::from("Ferrös").eq_ignore_ascii_case("FERRöS"));
assert!(!OsString::from("Ferrös").eq_ignore_ascii_case("FERRÖS"));

pub fn display(&self) -> Display<'_>

🔬This is a nightly-only experimental API. (os_str_display #120048)

Returns an object that implements Display for safely printing an OsStr that may contain non-Unicode data. This may perform lossy conversion, depending on the platform. If you would like an implementation which escapes the OsStr please use Debug instead.

Examples

#![feature(os_str_display)]
use std::ffi::OsStr;

let s = OsStr::new("Hello, world!");
println!("{}", s.display());

Trait Implementations

impl AsRef<OsStr> for Component<'_>

fn as_ref(&self) -> &OsStr

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<OsStr> for Components<'_>

fn as_ref(&self) -> &OsStr

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<OsStr> for Iter<'_>

fn as_ref(&self) -> &OsStr

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<OsStr> for OsStr

fn as_ref(&self) -> &OsStr

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<OsStr> for OsString

fn as_ref(&self) -> &OsStr

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<OsStr> for Path

fn as_ref(&self) -> &OsStr

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<OsStr> for PathBuf

fn as_ref(&self) -> &OsStr

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<OsStr> for String

fn as_ref(&self) -> &OsStr

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<OsStr> for str

fn as_ref(&self) -> &OsStr

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<Path> for OsStr

fn as_ref(&self) -> &Path

Converts this type into a shared reference of the (usually inferred) input type.

impl Borrow<OsStr> for OsString

fn borrow(&self) -> &OsStr

Immutably borrows from an owned value.

impl Clone for Box<OsStr>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for OsStr

fn fmt(&self, formatter: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for &OsStr

fn default() -> Self

Creates an empty OsStr.

impl Default for Box<OsStr>

fn default() -> Box<OsStr>

Returns the “default value” for a type.

impl<'a> Extend<&'a OsStr> for OsString

fn extend<T: IntoIterator<Item = &'a OsStr>>(&mut self, iter: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one #72631)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one #72631)

Reserves capacity in a collection for the given number of additional elements.

impl From<&OsStr> for Arc<OsStr>

fn from(s: &OsStr) -> Arc<OsStr>

Copies the string into a newly allocated Arc<OsStr>.

impl From<&OsStr> for Box<OsStr>

fn from(s: &OsStr) -> Box<OsStr>

Copies the string into a newly allocated Box<OsStr>.

impl<'a> From<&'a OsStr> for Cow<'a, OsStr>

fn from(s: &'a OsStr) -> Cow<'a, OsStr>

Converts the string reference into a Cow::Borrowed.

impl From<&OsStr> for Rc<OsStr>

fn from(s: &OsStr) -> Rc<OsStr>

Copies the string into a newly allocated Rc<OsStr>.

impl From<Cow<'_, OsStr>> for Box<OsStr>

fn from(cow: Cow<'_, OsStr>) -> Box<OsStr>

Converts a Cow<'a, OsStr> into a Box<OsStr>, by copying the contents if they are borrowed.

impl From<OsString> for Box<OsStr>

fn from(s: OsString) -> Box<OsStr>

Converts an OsString into a Box<OsStr> without copying or allocating.

impl<'a> FromIterator<&'a OsStr> for OsString

fn from_iter<I: IntoIterator<Item = &'a OsStr>>(iter: I) -> Self

Creates a value from an iterator.

impl Hash for OsStr

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher.

impl<S: Borrow<OsStr>> Join<&OsStr> for [S]

type Output = OsString

🔬This is a nightly-only experimental API. (slice_concat_trait #27747)

The resulting type after concatenation

fn join(slice: &Self, sep: &OsStr) -> OsString

🔬This is a nightly-only experimental API. (slice_concat_trait #27747)

Implementation of [T]::join

impl Ord for OsStr

fn cmp(&self, other: &OsStr) -> Ordering

This method returns an Ordering between self and other.

impl OsStrExt for OsStr

Available on WASI only.

fn from_bytes(slice: &[u8]) -> &OsStr

Creates an OsStr from a byte slice.

fn as_bytes(&self) -> &[u8]

Gets the underlying byte view of the OsStr slice.

impl OsStrExt for OsStr

Available on Windows only.

fn encode_wide(&self) -> EncodeWide<'_>

Re-encodes an OsStr as a wide character sequence, i.e., potentially ill-formed UTF-16.

impl OsStrExt for OsStr

Available on Unix only.

fn from_bytes(slice: &[u8]) -> &OsStr

Creates an OsStr from a byte slice.

fn as_bytes(&self) -> &[u8]

Gets the underlying byte view of the OsStr slice.

impl<'a, 'b> PartialEq<&'b OsStr> for Cow<'a, OsStr>

fn eq(&self, other: &&'b OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a, 'b> PartialEq<&'b OsStr> for Cow<'a, Path>

fn eq(&self, other: &&'b OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a, 'b> PartialEq<&'a OsStr> for OsString

fn eq(&self, other: &&'a OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a> PartialEq<&'a OsStr> for Path

fn eq(&self, other: &&'a OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a> PartialEq<&'a OsStr> for PathBuf

fn eq(&self, other: &&'a OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a> PartialEq<&'a Path> for OsStr

fn eq(&self, other: &&'a Path) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a, 'b> PartialEq<Cow<'a, OsStr>> for &'b OsStr

fn eq(&self, other: &Cow<'a, OsStr>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a, 'b> PartialEq<Cow<'a, OsStr>> for OsStr

fn eq(&self, other: &Cow<'a, OsStr>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a, 'b> PartialEq<Cow<'a, Path>> for &'b OsStr

fn eq(&self, other: &Cow<'a, Path>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a> PartialEq<Cow<'a, Path>> for OsStr

fn eq(&self, other: &Cow<'a, Path>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a> PartialEq<OsStr> for &'a Path

fn eq(&self, other: &OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a, 'b> PartialEq<OsStr> for Cow<'a, OsStr>

fn eq(&self, other: &OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a> PartialEq<OsStr> for Cow<'a, Path>

fn eq(&self, other: &OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a, 'b> PartialEq<OsStr> for OsString

fn eq(&self, other: &OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<OsStr> for Path

fn eq(&self, other: &OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<OsStr> for PathBuf

fn eq(&self, other: &OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<OsStr> for str

fn eq(&self, other: &OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a, 'b> PartialEq<OsString> for &'a OsStr

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a, 'b> PartialEq<OsString> for OsStr

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a> PartialEq<Path> for &'a OsStr

fn eq(&self, other: &Path) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Path> for OsStr

fn eq(&self, other: &Path) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a> PartialEq<PathBuf> for &'a OsStr

fn eq(&self, other: &PathBuf) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<PathBuf> for OsStr

fn eq(&self, other: &PathBuf) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<str> for OsStr

fn eq(&self, other: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for OsStr

fn eq(&self, other: &OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a, 'b> PartialOrd<&'b OsStr> for Cow<'a, OsStr>

fn partial_cmp(&self, other: &&'b OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<&'b OsStr> for Cow<'a, Path>

fn partial_cmp(&self, other: &&'b OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<&'a OsStr> for OsString

fn partial_cmp(&self, other: &&'a OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> PartialOrd<&'a OsStr> for Path

fn partial_cmp(&self, other: &&'a OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> PartialOrd<&'a OsStr> for PathBuf

fn partial_cmp(&self, other: &&'a OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> PartialOrd<&'a Path> for OsStr

fn partial_cmp(&self, other: &&'a Path) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<Cow<'a, OsStr>> for &'b OsStr

fn partial_cmp(&self, other: &Cow<'a, OsStr>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<Cow<'a, OsStr>> for OsStr

fn partial_cmp(&self, other: &Cow<'a, OsStr>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<Cow<'a, Path>> for &'b OsStr

fn partial_cmp(&self, other: &Cow<'a, Path>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> PartialOrd<Cow<'a, Path>> for OsStr

fn partial_cmp(&self, other: &Cow<'a, Path>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> PartialOrd<OsStr> for &'a Path

fn partial_cmp(&self, other: &OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<OsStr> for Cow<'a, OsStr>

fn partial_cmp(&self, other: &OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> PartialOrd<OsStr> for Cow<'a, Path>

fn partial_cmp(&self, other: &OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<OsStr> for OsString

fn partial_cmp(&self, other: &OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<OsStr> for Path

fn partial_cmp(&self, other: &OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<OsStr> for PathBuf

fn partial_cmp(&self, other: &OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<OsString> for &'a OsStr

fn partial_cmp(&self, other: &OsString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<OsString> for OsStr

fn partial_cmp(&self, other: &OsString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> PartialOrd<Path> for &'a OsStr

fn partial_cmp(&self, other: &Path) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Path> for OsStr

fn partial_cmp(&self, other: &Path) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> PartialOrd<PathBuf> for &'a OsStr

fn partial_cmp(&self, other: &PathBuf) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<PathBuf> for OsStr

fn partial_cmp(&self, other: &PathBuf) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<str> for OsStr

fn partial_cmp(&self, other: &str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd for OsStr

fn partial_cmp(&self, other: &OsStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &OsStr) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &OsStr) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &OsStr) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &OsStr) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl ToOwned for OsStr

type Owned = OsString

The resulting type after obtaining ownership.

fn to_owned(&self) -> OsString

Creates owned data from borrowed data, usually by cloning.

fn clone_into(&self, target: &mut OsString)

Uses borrowed data to replace owned data, usually by cloning.

impl<'a> TryFrom<&'a OsStr> for &'a str

fn try_from(value: &'a OsStr) -> Result<Self, Self::Error>

Tries to convert an &OsStr to a &str.

use std::ffi::OsStr;

let os_str = OsStr::new("foo");
let as_str = <&str>::try_from(os_str).unwrap();
assert_eq!(as_str, "foo");

type Error = Utf8Error

The type returned in the event of a conversion error.

impl Eq for OsStr