Unstable features

Rustdoc is under active development, and like the Rust compiler, some features are only available on nightly releases. Some of these features are new and need some more testing before they're able to be released to the world at large, and some of them are tied to features in the Rust compiler that are unstable. Several features here require a matching #![feature(...)] attribute to enable, and thus are more fully documented in the Unstable Book. Those sections will link over there as necessary.

Nightly-gated functionality

These features just require a nightly build to operate. Unlike the other features on this page, these don't need to be "turned on" with a command-line flag or a #![feature(...)] attribute in your crate. This can give them some subtle fallback modes when used on a stable release, so be careful!

Error numbers for `compile-fail` doctests

As detailed in the chapter on documentation tests, you can add a compile_fail attribute to a doctest to state that the test should fail to compile. However, on nightly, you can optionally add an error number to state that a doctest should emit a specific error number:

```compile_fail,E0044
extern { fn some_func<T>(x: T); }
```

This is used by the error index to ensure that the samples that correspond to a given error number properly emit that error code. However, these error codes aren't guaranteed to be the only thing that a piece of code emits from version to version, so this is unlikely to be stabilized in the future.

Attempting to use these error numbers on stable will result in the code sample being interpreted as plain text.

`missing_doc_code_examples` lint

This lint will emit a warning if an item doesn't have a code example in its documentation. It can be enabled using:

#![deny(rustdoc::missing_doc_code_examples)]

Extensions to the `#[doc]` attribute

These features operate by extending the #[doc] attribute, and thus can be caught by the compiler and enabled with a #![feature(...)] attribute in your crate.

`#[doc(cfg)]`: Recording what platforms or features are required for code to be present

Tracking issue: #43781

You can use #[doc(cfg(...))] to tell Rustdoc exactly which platform items appear on. This has two effects:

doctests will only run on the appropriate platforms, and
When Rustdoc renders documentation for that item, it will be accompanied by a banner explaining that the item is only available on certain platforms.

#[doc(cfg)] is intended to be used alongside #[cfg(doc)]. For example, #[cfg(any(windows, doc))] will preserve the item either on Windows or during the documentation process. Then, adding a new attribute #[doc(cfg(windows))] will tell Rustdoc that the item is supposed to be used on Windows. For example:

#![allow(unused)]
#![feature(doc_cfg)]

fn main() {
/// Token struct that can only be used on Windows.
#[cfg(any(windows, doc))]
#[doc(cfg(windows))]
pub struct WindowsToken;

/// Token struct that can only be used on Unix.
#[cfg(any(unix, doc))]
#[doc(cfg(unix))]
pub struct UnixToken;

/// Token struct that is only available with the `serde` feature
#[cfg(feature = "serde")]
#[doc(cfg(feature = "serde"))]
#[derive(serde::Deserialize)]
pub struct SerdeToken;
}

In this sample, the tokens will only appear on their respective platforms, but they will both appear in documentation.

#[doc(cfg(...))] was introduced to be used by the standard library and currently requires the #![feature(doc_cfg)] feature gate. For more information, see its chapter in the Unstable Book and its tracking issue.

`doc_auto_cfg`: Automatically generate `#[doc(cfg)]`

Tracking issue: #43781

doc_auto_cfg is an extension to the #[doc(cfg)] feature. With it, you don't need to add #[doc(cfg(...)] anymore unless you want to override the default behaviour. So if we take the previous source code:

#![allow(unused)]
#![feature(doc_auto_cfg)]

fn main() {
/// Token struct that can only be used on Windows.
#[cfg(any(windows, doc))]
pub struct WindowsToken;

/// Token struct that can only be used on Unix.
#[cfg(any(unix, doc))]
pub struct UnixToken;

/// Token struct that is only available with the `serde` feature
#[cfg(feature = "serde")]
#[derive(serde::Deserialize)]
pub struct SerdeToken;
}

It'll render almost the same, the difference being that doc will also be displayed. To fix this, you can use doc_cfg_hide:

#![allow(unused)]
#![feature(doc_cfg_hide)]
#![doc(cfg_hide(doc))]
fn main() {
}

And doc won't show up anymore!

Adding your trait to the "Notable traits" dialog

Tracking issue: #45040

Rustdoc keeps a list of a few traits that are believed to be "fundamental" to types that implement them. These traits are intended to be the primary interface for their implementers, and are often most of the API available to be documented on their types. For this reason, Rustdoc will track when a given type implements one of these traits and call special attention to it when a function returns one of these types. This is the "Notable traits" dialog, accessible as a circled i button next to the function, which, when clicked, shows the dialog.

In the standard library, some of the traits that are part of this list are Iterator, Future, io::Read, and io::Write. However, rather than being implemented as a hard-coded list, these traits have a special marker attribute on them: #[doc(notable_trait)]. This means that you can apply this attribute to your own trait to include it in the "Notable traits" dialog in documentation.

The #[doc(notable_trait)] attribute currently requires the #![feature(doc_notable_trait)] feature gate. For more information, see its chapter in the Unstable Book and its tracking issue.

Exclude certain dependencies from documentation

Tracking issue: #44027

The standard library uses several dependencies which, in turn, use several types and traits from the standard library. In addition, there are several compiler-internal crates that are not considered to be part of the official standard library, and thus would be a distraction to include in documentation. It's not enough to exclude their crate documentation, since information about trait implementations appears on the pages for both the type and the trait, which can be in different crates!

To prevent internal types from being included in documentation, the standard library adds an attribute to their extern crate declarations: #[doc(masked)]. This causes Rustdoc to "mask out" types from these crates when building lists of trait implementations.

The #[doc(masked)] attribute is intended to be used internally, and requires the #![feature(doc_masked)] feature gate. For more information, see its chapter in the Unstable Book and its tracking issue.

Document primitives

This is for Rust compiler internal use only.

Since primitive types are defined in the compiler, there's no place to attach documentation attributes. The #[rustc_doc_primitive = "..."] attribute is used by the standard library to provide a way to generate documentation for primitive types, and requires #![feature(rustc_attrs)] to enable.

Document keywords

This is for Rust compiler internal use only.

Rust keywords are documented in the standard library (look for match for example).

To do so, the #[doc(keyword = "...")] attribute is used. Example:

#![allow(unused)]
#![feature(rustdoc_internals)]
#![allow(internal_features)]

fn main() {
/// Some documentation about the keyword.
#[doc(keyword = "keyword")]
mod empty_mod {}
}

Use the Rust logo as the crate logo

This is for official Rust project use only.

Internal Rustdoc pages like settings.html and scrape-examples-help.html show the Rust logo. This logo is tracked as a static resource. The attribute #![doc(rust_logo)] makes this same built-in resource act as the main logo.

#![allow(unused)]
#![feature(rustdoc_internals)]
#![allow(internal_features)]
#![doc(rust_logo)]
fn main() {
//! This crate has the Rust(tm) branding on it.
}

Effects of other nightly features

These nightly-only features are not primarily related to Rustdoc, but have convenient effects on the documentation produced.

`fundamental` types

Annotating a type with #[fundamental] primarily influences coherence rules about generic types, i.e., they alter whether other crates can provide implementations for that type. The unstable book links to further information.

For documentation, this has an additional side effect: If a method is implemented on F<T> (or F<&T>), where F is a fundamental type, then the method is not only documented at the page about F, but also on the page about T. In a sense, it makes the type transparent to Rustdoc. This is especially convenient for types that work as annotated pointers, such as Pin<&mut T>, as it ensures that methods only implemented through those annotated pointers can still be found with the type they act on.

If the fundamental feature's effect on coherence is not intended, such a type can be marked as fundamental only for purposes of documentation by introducing a custom feature and limiting the use of fundamental to when documentation is built.

Unstable command-line arguments

These features are enabled by passing a command-line flag to Rustdoc, but the flags in question are themselves marked as unstable. To use any of these options, pass -Z unstable-options as well as the flag in question to Rustdoc on the command-line. To do this from Cargo, you can either use the RUSTDOCFLAGS environment variable or the cargo rustdoc command.

`--markdown-before-content`: include rendered Markdown before the content

Tracking issue: #44027

Using this flag looks like this:

$ rustdoc src/lib.rs -Z unstable-options --markdown-before-content extra.md
$ rustdoc README.md -Z unstable-options --markdown-before-content extra.md

Just like --html-before-content, this allows you to insert extra content inside the <body> tag but before the other content rustdoc would normally produce in the rendered documentation. However, instead of directly inserting the file verbatim, rustdoc will pass the files through a Markdown renderer before inserting the result into the file.

`--markdown-after-content`: include rendered Markdown after the content

Using this flag looks like this:

$ rustdoc src/lib.rs -Z unstable-options --markdown-after-content extra.md
$ rustdoc README.md -Z unstable-options --markdown-after-content extra.md

Just like --html-after-content, this allows you to insert extra content before the </body> tag but after the other content rustdoc would normally produce in the rendered documentation. However, instead of directly inserting the file verbatim, rustdoc will pass the files through a Markdown renderer before inserting the result into the file.

`--playground-url`: control the location of the playground

Using this flag looks like this:

$ rustdoc src/lib.rs -Z unstable-options --playground-url https://play.rust-lang.org/

When rendering a crate's docs, this flag gives the base URL of the Rust Playground, to use for generating Run buttons. Unlike --markdown-playground-url, this argument works for standalone Markdown files and Rust crates. This works the same way as adding #![doc(html_playground_url = "url")] to your crate root, as mentioned in the chapter about the #[doc] attribute. Please be aware that the official Rust Playground at https://play.rust-lang.org does not have every crate available, so if your examples require your crate, make sure the playground you provide has your crate available.

If both --playground-url and --markdown-playground-url are present when rendering a standalone Markdown file, the URL given to --markdown-playground-url will take precedence. If both --playground-url and #![doc(html_playground_url = "url")] are present when rendering crate docs, the attribute will take precedence.

`--sort-modules-by-appearance`: control how items on module pages are sorted

Using this flag looks like this:

$ rustdoc src/lib.rs -Z unstable-options --sort-modules-by-appearance

Ordinarily, when rustdoc prints items in module pages, it will sort them alphabetically (taking some consideration for their stability, and names that end in a number). Giving this flag to rustdoc will disable this sorting and instead make it print the items in the order they appear in the source.

`--show-type-layout`: add a section to each type's docs describing its memory layout

Tracking issue: #113248

Using this flag looks like this:

$ rustdoc src/lib.rs -Z unstable-options --show-type-layout

When this flag is passed, rustdoc will add a "Layout" section at the bottom of each type's docs page that includes a summary of the type's memory layout as computed by rustc. For example, rustdoc will show the size in bytes that a value of that type will take in memory.

Note that most layout information is completely unstable and may even differ between compilations.

`--resource-suffix`: modifying the name of CSS/JavaScript in crate docs

Tracking issue: #54765

Using this flag looks like this:

$ rustdoc src/lib.rs -Z unstable-options --resource-suffix suf

When rendering docs, rustdoc creates several CSS and JavaScript files as part of the output. Since all these files are linked from every page, changing where they are can be cumbersome if you need to specially cache them. This flag will rename all these files in the output to include the suffix in the filename. For example, light.css would become light-suf.css with the above command.

`--extern-html-root-url`: control how rustdoc links to non-local crates

Using this flag looks like this:

$ rustdoc src/lib.rs -Z unstable-options --extern-html-root-url some-crate=https://example.com/some-crate/1.0.1

Ordinarily, when rustdoc wants to link to a type from a different crate, it looks in two places: docs that already exist in the output directory, or the #![doc(doc_html_root)] set in the other crate. However, if you want to link to docs that exist in neither of those places, you can use these flags to control that behavior. When the --extern-html-root-url flag is given with a name matching one of your dependencies, rustdoc use that URL for those docs. Keep in mind that if those docs exist in the output directory, those local docs will still override this flag.

`-Z force-unstable-if-unmarked`

Using this flag looks like this:

$ rustdoc src/lib.rs -Z force-unstable-if-unmarked

This is an internal flag intended for the standard library and compiler that applies an #[unstable] attribute to any dependent crate that doesn't have another stability attribute. This allows rustdoc to be able to generate documentation for the compiler crates and the standard library, as an equivalent command-line argument is provided to rustc when building those crates.

`--index-page`: provide a top-level landing page for docs

This feature allows you to generate an index-page with a given markdown file. A good example of it is the rust documentation index.

With this, you'll have a page which you can customize as much as you want at the top of your crates.

Using index-page option enables enable-index-page option as well.

`--enable-index-page`: generate a default index page for docs

This feature allows the generation of a default index-page which lists the generated crates.

`--nocapture`: disable output capture for test

When this flag is used with --test, the output (stdout and stderr) of your tests won't be captured by rustdoc. Instead, the output will be directed to your terminal, as if you had run the test executable manually. This is especially useful for debugging your tests!

`--check`: only checks the documentation

When this flag is supplied, rustdoc will type check and lint your code, but will not generate any documentation or run your doctests.

Using this flag looks like:

rustdoc -Z unstable-options --check src/lib.rs

`--static-root-path`: control how static files are loaded in HTML output

Using this flag looks like this:

$ rustdoc src/lib.rs -Z unstable-options --static-root-path '/cache/'

This flag controls how rustdoc links to its static files on HTML pages. If you're hosting a lot of crates' docs generated by the same version of rustdoc, you can use this flag to cache rustdoc's CSS, JavaScript, and font files in a single location, rather than duplicating it once per "doc root" (grouping of crate docs generated into the same output directory, like with cargo doc). Per-crate files like the search index will still load from the documentation root, but anything that gets renamed with --resource-suffix will load from the given path.

`--persist-doctests`: persist doctest executables after running

Tracking issue: #56925

Using this flag looks like this:

$ rustdoc src/lib.rs --test -Z unstable-options --persist-doctests target/rustdoctest

This flag allows you to keep doctest executables around after they're compiled or run. Usually, rustdoc will immediately discard a compiled doctest after it's been tested, but with this option, you can keep those binaries around for farther testing.

`--show-coverage`: calculate the percentage of items with documentation

Tracking issue: #58154

Using this flag looks like this:

$ rustdoc src/lib.rs -Z unstable-options --show-coverage

It generates something like this:

+-------------------------------------+------------+------------+------------+------------+
| File                                | Documented | Percentage |   Examples | Percentage |
+-------------------------------------+------------+------------+------------+------------+
| lib.rs                              |          4 |     100.0% |          1 |      25.0% |
+-------------------------------------+------------+------------+------------+------------+
| Total                               |          4 |     100.0% |          1 |      25.0% |
+-------------------------------------+------------+------------+------------+------------+

If you want to determine how many items in your crate are documented, pass this flag to rustdoc. When it receives this flag, it will count the public items in your crate that have documentation, and print out the counts and a percentage instead of generating docs.

Some methodology notes about what rustdoc counts in this metric:

Rustdoc will only count items from your crate (i.e. items re-exported from other crates don't count).
Docs written directly onto inherent impl blocks are not counted, even though their doc comments are displayed, because the common pattern in Rust code is to write all inherent methods into the same impl block.
Items in a trait implementation are not counted, as those impls will inherit any docs from the trait itself.
By default, only public items are counted. To count private items as well, pass --document-private-items at the same time.

Public items that are not documented can be seen with the built-in missing_docs lint. Private items that are not documented can be seen with Clippy's missing_docs_in_private_items lint.

Calculating code examples follows these rules:

These items aren't accounted by default:

struct/union field
enum variant
constant
static
typedef

If one of the previously listed items has a code example, then it'll be counted.

JSON output

When using --output-format json with this option, it will display the coverage information in JSON format. For example, here is the JSON for a file with one documented item and one undocumented item:

#![allow(unused)]
fn main() {
/// This item has documentation
pub fn foo() {}

pub fn no_documentation() {}
}

{"no_std.rs":{"total":3,"with_docs":1,"total_examples":3,"with_examples":0}}

Note that the third item is the crate root, which in this case is undocumented.

`-w`/`--output-format`: output format

--output-format json emits documentation in the experimental JSON format. --output-format html has no effect, and is also accepted on stable toolchains.

JSON Output for toolchain crates (std, alloc, core, test, and proc_macro) is available via the rust-docs-json rustup component.

rustup component add --toolchain nightly rust-docs-json

Then the json files will be present in the share/doc/rust/json/ directory of the rustup toolchain directory.

It can also be used with --show-coverage. Take a look at its documentation for more information.

`--enable-per-target-ignores`: allow `ignore-foo` style filters for doctests

Tracking issue: #64245

Using this flag looks like this:

$ rustdoc src/lib.rs -Z unstable-options --enable-per-target-ignores

This flag allows you to tag doctests with compiletest style ignore-foo filters that prevent rustdoc from running that test if the target triple string contains foo. For example:

#![allow(unused)]
fn main() {
///```ignore-foo,ignore-bar
///assert!(2 == 2);
///```
struct Foo;
}

This will not be run when the build target is super-awesome-foo or less-bar-awesome. If the flag is not enabled, then rustdoc will consume the filter, but do nothing with it, and the above example will be run for all targets. If you want to preserve backwards compatibility for older versions of rustdoc, you can use

#![allow(unused)]
fn main() {
///```ignore,ignore-foo
///assert!(2 == 2);
///```
struct Foo;
}

In older versions, this will be ignored on all targets, but on newer versions ignore-gnu will override ignore.

`--runtool`, `--runtool-arg`: program to run tests with; args to pass to it

Tracking issue: #64245

Using these options looks like this:

$ rustdoc src/lib.rs -Z unstable-options --runtool runner --runtool-arg --do-thing --runtool-arg --do-other-thing

These options can be used to run the doctest under a program, and also pass arguments to that program. For example, if you want to run your doctests under valgrind you might run

$ rustdoc src/lib.rs -Z unstable-options --runtool valgrind

Another use case would be to run a test inside an emulator, or through a Virtual Machine.

`--with-examples`: include examples of uses of items as documentation

Tracking issue: #88791

This option, combined with --scrape-examples-target-crate and --scrape-examples-output-path, is used to implement the functionality in RFC #3123. Uses of an item (currently functions / call-sites) are found in a crate and its reverse-dependencies, and then the uses are included as documentation for that item. This feature is intended to be used via cargo doc --scrape-examples, but the rustdoc-only workflow looks like:

$ rustdoc examples/ex.rs -Z unstable-options \
    --extern foobar=target/deps/libfoobar.rmeta \
    --scrape-examples-target-crate foobar \
    --scrape-examples-output-path output.calls
$ rustdoc src/lib.rs -Z unstable-options --with-examples output.calls

First, the library must be checked to generate an rmeta. Then a reverse-dependency like examples/ex.rs is given to rustdoc with the target crate being documented (foobar) and a path to output the calls (output.calls). Then, the generated calls file can be passed via --with-examples to the subsequent documentation of foobar.

To scrape examples from test code, e.g. functions marked #[test], then add the --scrape-tests flag.

`--generate-link-to-definition`: Generate links on types in source code

Tracking issue: #89095

This flag enables the generation of links in the source code pages which allow the reader to jump to a type definition.

Custom CSS classes for code blocks

#![allow(unused)]
#![feature(custom_code_classes_in_docs)]

fn main() {
/// ```custom,{class=language-c}
/// int main(void) { return 0; }
/// ```
pub struct Bar;
}

The text int main(void) { return 0; } is rendered without highlighting in a code block with the class language-c. This can be used to highlight other languages through JavaScript libraries for example.

Without the custom attribute, it would be generated as a Rust code example with an additional language-C CSS class. Therefore, if you specifically don't want it to be a Rust code example, don't forget to add the custom attribute.

To be noted that you can replace class= with . to achieve the same result:

#![allow(unused)]
#![feature(custom_code_classes_in_docs)]

fn main() {
/// ```custom,{.language-c}
/// int main(void) { return 0; }
/// ```
pub struct Bar;
}

To be noted, rust and .rust/class=rust have different effects: rust indicates that this is a Rust code block whereas the two others add a "rust" CSS class on the code block.

You can also use double quotes:

#![allow(unused)]
#![feature(custom_code_classes_in_docs)]

fn main() {
/// ```"not rust" {."hello everyone"}
/// int main(void) { return 0; }
/// ```
pub struct Bar;
}

The rustdoc book