cargo-test(1)

NAME

cargo-test - Execute unit and integration tests of a package

SYNOPSIS

cargo test [options] [testname] [-- test-options]

DESCRIPTION

Compile and execute unit, integration, and documentation tests.

The test filtering argument TESTNAME and all the arguments following the two dashes (--) are passed to the test binaries and thus to libtest (rustc's built in unit-test and micro-benchmarking framework). If you're passing arguments to both Cargo and the binary, the ones after -- go to the binary, the ones before go to Cargo. For details about libtest's arguments see the output of cargo test -- --help and check out the rustc book's chapter on how tests work at https://doc.rust-lang.org/rustc/tests/index.html.

As an example, this will filter for tests with foo in their name and run them on 3 threads in parallel:

cargo test foo -- --test-threads 3

Tests are built with the --test option to rustc which creates a special executable by linking your code with libtest. The executable automatically runs all functions annotated with the #[test] attribute in multiple threads. #[bench] annotated functions will also be run with one iteration to verify that they are functional.

If the package contains multiple test targets, each target compiles to a special executable as aforementioned, and then is run serially.

The libtest harness may be disabled by setting harness = false in the target manifest settings, in which case your code will need to provide its own main function to handle running tests.

Documentation tests

Documentation tests are also run by default, which is handled by rustdoc. It extracts code samples from documentation comments of the library target, and then executes them.

Different from normal test targets, each code block compiles to a doctest executable on the fly with rustc. These executables run in parallel in separate processes. The compilation of a code block is in fact a part of test function controlled by libtest, so some options such as --jobs might not take effect. Note that this execution model of doctests is not guaranteed and may change in the future; beware of depending on it.

See the rustdoc book for more information on writing doc tests.

OPTIONS

Test Options

--no-run
Compile, but don't run tests.
--no-fail-fast
Run all tests regardless of failure. Without this flag, Cargo will exit after the first executable fails. The Rust test harness will run all tests within the executable to completion, this flag only applies to the executable as a whole.

Package Selection

By default, when no package selection options are given, the packages selected depend on the selected manifest file (based on the current working directory if --manifest-path is not given). If the manifest is the root of a workspace then the workspaces default members are selected, otherwise only the package defined by the manifest will be selected.

The default members of a workspace can be set explicitly with the workspace.default-members key in the root manifest. If this is not set, a virtual workspace will include all workspace members (equivalent to passing --workspace), and a non-virtual workspace will include only the root crate itself.

-p spec...
--package spec...
Test only the specified packages. See cargo-pkgid(1) for the SPEC format. This flag may be specified multiple times and supports common Unix glob patterns like *, ? and []. However, to avoid your shell accidentally expanding glob patterns before Cargo handles them, you must use single quotes or double quotes around each pattern.
--workspace
Test all members in the workspace.
--all
Deprecated alias for --workspace.
--exclude SPEC...
Exclude the specified packages. Must be used in conjunction with the --workspace flag. This flag may be specified multiple times and supports common Unix glob patterns like *, ? and []. However, to avoid your shell accidentally expanding glob patterns before Cargo handles them, you must use single quotes or double quotes around each pattern.

Target Selection

When no target selection options are given, cargo test will build the following targets of the selected packages:

  • lib — used to link with binaries, examples, integration tests, and doc tests
  • bins (only if integration tests are built and required features are available)
  • examples — to ensure they compile
  • lib as a unit test
  • bins as unit tests
  • integration tests
  • doc tests for the lib target

The default behavior can be changed by setting the test flag for the target in the manifest settings. Setting examples to test = true will build and run the example as a test. Setting targets to test = false will stop them from being tested by default. Target selection options that take a target by name ignore the test flag and will always test the given target.

Doc tests for libraries may be disabled by setting doctest = false for the library in the manifest.

Binary targets are automatically built if there is an integration test or benchmark being selected to test. This allows an integration test to execute the binary to exercise and test its behavior. The CARGO_BIN_EXE_<name> environment variable is set when the integration test is built so that it can use the env macro to locate the executable.

Passing target selection flags will test only the specified targets.

Note that --bin, --example, --test and --bench flags also support common Unix glob patterns like *, ? and []. However, to avoid your shell accidentally expanding glob patterns before Cargo handles them, you must use single quotes or double quotes around each glob pattern.

--lib
Test the package's library.
--bin name...
Test the specified binary. This flag may be specified multiple times and supports common Unix glob patterns.
--bins
Test all binary targets.
--example name...
Test the specified example. This flag may be specified multiple times and supports common Unix glob patterns.
--examples
Test all example targets.
--test name...
Test the specified integration test. This flag may be specified multiple times and supports common Unix glob patterns.
--tests
Test all targets in test mode that have the test = true manifest flag set. By default this includes the library and binaries built as unittests, and integration tests. Be aware that this will also build any required dependencies, so the lib target may be built twice (once as a unittest, and once as a dependency for binaries, integration tests, etc.). Targets may be enabled or disabled by setting the test flag in the manifest settings for the target.
--bench name...
Test the specified benchmark. This flag may be specified multiple times and supports common Unix glob patterns.
--benches
Test all targets in benchmark mode that have the bench = true manifest flag set. By default this includes the library and binaries built as benchmarks, and bench targets. Be aware that this will also build any required dependencies, so the lib target may be built twice (once as a benchmark, and once as a dependency for binaries, benchmarks, etc.). Targets may be enabled or disabled by setting the bench flag in the manifest settings for the target.
--all-targets
Test all targets. This is equivalent to specifying --lib --bins --tests --benches --examples.
--doc
Test only the library's documentation. This cannot be mixed with other target options.

Feature Selection

The feature flags allow you to control which features are enabled. When no feature options are given, the default feature is activated for every selected package.

See the features documentation for more details.

-F features
--features features
Space or comma separated list of features to activate. Features of workspace members may be enabled with package-name/feature-name syntax. This flag may be specified multiple times, which enables all specified features.
--all-features
Activate all available features of all selected packages.
--no-default-features
Do not activate the default feature of the selected packages.

Compilation Options

--target triple
Test for the given architecture. The default is the host architecture. The general format of the triple is <arch><sub>-<vendor>-<sys>-<abi>. Run rustc --print target-list for a list of supported targets. This flag may be specified multiple times.

This may also be specified with the build.target config value.

Note that specifying this flag makes Cargo run in a different mode where the target artifacts are placed in a separate directory. See the build cache documentation for more details.

-r
--release
Test optimized artifacts with the release profile. See also the --profile option for choosing a specific profile by name.
--profile name
Test with the given profile. See the the reference for more details on profiles.
--ignore-rust-version
Test the target even if the selected Rust compiler is older than the required Rust version as configured in the project's rust-version field.
--timings=fmts
Output information how long each compilation takes, and track concurrency information over time. Accepts an optional comma-separated list of output formats; --timings without an argument will default to --timings=html. Specifying an output format (rather than the default) is unstable and requires -Zunstable-options. Valid output formats:

  • html (unstable, requires -Zunstable-options): Write a human-readable file cargo-timing.html to the target/cargo-timings directory with a report of the compilation. Also write a report to the same directory with a timestamp in the filename if you want to look at older runs. HTML output is suitable for human consumption only, and does not provide machine-readable timing data.
  • json (unstable, requires -Zunstable-options): Emit machine-readable JSON information about timing information.

Output Options

--target-dir directory
Directory for all generated artifacts and intermediate files. May also be specified with the CARGO_TARGET_DIR environment variable, or the build.target-dir config value. Defaults to target in the root of the workspace.

Display Options

By default the Rust test harness hides output from test execution to keep results readable. Test output can be recovered (e.g., for debugging) by passing --nocapture to the test binaries:

cargo test -- --nocapture
-v
--verbose
Use verbose output. May be specified twice for "very verbose" output which includes extra output such as dependency warnings and build script output. May also be specified with the term.verbose config value.
-q
--quiet
Do not print cargo log messages. May also be specified with the term.quiet config value.
--color when
Control when colored output is used. Valid values:

  • auto (default): Automatically detect if color support is available on the terminal.
  • always: Always display colors.
  • never: Never display colors.

May also be specified with the term.color config value.

--message-format fmt
The output format for diagnostic messages. Can be specified multiple times and consists of comma-separated values. Valid values:

  • human (default): Display in a human-readable text format. Conflicts with short and json.
  • short: Emit shorter, human-readable text messages. Conflicts with human and json.
  • json: Emit JSON messages to stdout. See the reference for more details. Conflicts with human and short.
  • json-diagnostic-short: Ensure the rendered field of JSON messages contains the "short" rendering from rustc. Cannot be used with human or short.
  • json-diagnostic-rendered-ansi: Ensure the rendered field of JSON messages contains embedded ANSI color codes for respecting rustc's default color scheme. Cannot be used with human or short.
  • json-render-diagnostics: Instruct Cargo to not include rustc diagnostics in JSON messages printed, but instead Cargo itself should render the JSON diagnostics coming from rustc. Cargo's own JSON diagnostics and others coming from rustc are still emitted. Cannot be used with human or short.

Manifest Options

--manifest-path path
Path to the Cargo.toml file. By default, Cargo searches for the Cargo.toml file in the current directory or any parent directory.
--frozen
--locked
Either of these flags requires that the Cargo.lock file is up-to-date. If the lock file is missing, or it needs to be updated, Cargo will exit with an error. The --frozen flag also prevents Cargo from attempting to access the network to determine if it is out-of-date.

These may be used in environments where you want to assert that the Cargo.lock file is up-to-date (such as a CI build) or want to avoid network access.

--offline
Prevents Cargo from accessing the network for any reason. Without this flag, Cargo will stop with an error if it needs to access the network and the network is not available. With this flag, Cargo will attempt to proceed without the network if possible.

Beware that this may result in different dependency resolution than online mode. Cargo will restrict itself to crates that are downloaded locally, even if there might be a newer version as indicated in the local copy of the index. See the cargo-fetch(1) command to download dependencies before going offline.

May also be specified with the net.offline config value.

Common Options

+toolchain
If Cargo has been installed with rustup, and the first argument to cargo begins with +, it will be interpreted as a rustup toolchain name (such as +stable or +nightly). See the rustup documentation for more information about how toolchain overrides work.
--config KEY=VALUE
Overrides a Cargo configuration value.
-h
--help
Prints help information.
-Z flag
Unstable (nightly-only) flags to Cargo. Run cargo -Z help for details.

Miscellaneous Options

The --jobs argument affects the building of the test executable but does not affect how many threads are used when running the tests. The Rust test harness includes an option to control the number of threads used:

cargo test -j 2 -- --test-threads=2
-j N
--jobs N
Number of parallel jobs to run. May also be specified with the build.jobs config value. Defaults to the number of logical CPUs. If negative, it sets the maximum number of parallel jobs to the number of logical CPUs plus provided value. Should not be 0.
--keep-going
Build as many crates in the dependency graph as possible, rather than aborting the build on the first one that fails to build. Unstable, requires -Zunstable-options.
--future-incompat-report
Displays a future-incompat report for any future-incompatible warnings produced during execution of this command

See cargo-report(1)

ENVIRONMENT

See the reference for details on environment variables that Cargo reads.

EXIT STATUS

  • 0: Cargo succeeded.
  • 101: Cargo failed to complete.

EXAMPLES

  1. Execute all the unit and integration tests of the current package:

    cargo test

  2. Run only tests whose names match against a filter string:

    cargo test name_filter

  3. Run only a specific test within a specific integration test:

    cargo test --test int_test_name -- modname::test_name

SEE ALSO

cargo(1), cargo-bench(1), types of tests, how to write tests