Struct rustc_target::spec::SanitizerSet

pub struct SanitizerSet {
    bits: u8,
}

Fields

bits: u8

Implementations

impl SanitizerSet

pub const ADDRESS: Self = _

pub const LEAK: Self = _

pub const MEMORY: Self = _

pub const THREAD: Self = _

pub const HWADDRESS: Self = _

pub const CFI: Self = _

pub const MEMTAG: Self = _

pub const SHADOWCALLSTACK: Self = _

pub const fn empty() -> Self

Returns an empty set of flags.

pub const fn all() -> Self

Returns the set containing all flags.

pub const fn bits(&self) -> u8

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: u8) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: u8) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: u8) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

impl SanitizerSet

pub fn as_str(self) -> Option<&'static str>

Return sanitizer’s name

Returns none if the flags is a set of sanitizers numbering not exactly one.

Trait Implementations

impl Binary for SanitizerSet

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd<SanitizerSet> for SanitizerSet

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

type Output = SanitizerSet

The resulting type after applying the & operator.

impl BitAndAssign<SanitizerSet> for SanitizerSet

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

impl BitOr<SanitizerSet> for SanitizerSet

fn bitor(self, other: SanitizerSet) -> Self

Returns the union of the two sets of flags.

type Output = SanitizerSet

The resulting type after applying the | operator.

impl BitOrAssign<SanitizerSet> for SanitizerSet

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

impl BitXor<SanitizerSet> for SanitizerSet

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

type Output = SanitizerSet

The resulting type after applying the ^ operator.

impl BitXorAssign<SanitizerSet> for SanitizerSet

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

impl Clone for SanitizerSet

fn clone(&self) -> SanitizerSet

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SanitizerSet

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<__D: Decoder> Decodable<__D> for SanitizerSet

fn decode(__decoder: &mut __D) -> Self

impl Default for SanitizerSet

fn default() -> SanitizerSet

Returns the “default value” for a type.

impl Display for SanitizerSet

Formats a sanitizer set as a comma separated list of sanitizers’ names.

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<__E: Encoder> Encodable<__E> for SanitizerSet

fn encode(&self, __encoder: &mut __E)

impl Extend<SanitizerSet> for SanitizerSet

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<SanitizerSet> for SanitizerSet

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator.

impl Hash for SanitizerSet

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)where
    H: Hasher,

Feeds a slice of this type into the given Hasher.

impl<CTX> HashStable<CTX> for SanitizerSet

fn hash_stable(&self, ctx: &mut CTX, hasher: &mut StableHasher)

impl IntoIterator for SanitizerSet

type Item = SanitizerSet

The type of the elements being iterated over.

type IntoIter = IntoIter<SanitizerSet, Global>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl LowerHex for SanitizerSet

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for SanitizerSet

fn not(self) -> Self

Returns the complement of this set of flags.

type Output = SanitizerSet

The resulting type after applying the ! operator.

impl Octal for SanitizerSet

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for SanitizerSet

fn cmp(&self, other: &SanitizerSet) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Selfwhere
    Self: PartialOrd<Self>,

Restrict a value to a certain interval.

impl PartialEq<SanitizerSet> for SanitizerSet

fn eq(&self, other: &SanitizerSet) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<SanitizerSet> for SanitizerSet

fn partial_cmp(&self, other: &SanitizerSet) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Sub<SanitizerSet> for SanitizerSet

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

type Output = SanitizerSet

The resulting type after applying the - operator.

impl SubAssign<SanitizerSet> for SanitizerSet

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

impl ToJson for SanitizerSet

fn to_json(&self) -> Json

impl UpperHex for SanitizerSet

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for SanitizerSet

impl Eq for SanitizerSet

impl StructuralEq for SanitizerSet

impl StructuralPartialEq for SanitizerSet

Layout

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference’s “Type Layout” chapter for details on type layout guarantees.

Size: 1 byte