Enum rustc_middle::mir::MirPhase

pub enum MirPhase {
    Built,
    Analysis(AnalysisPhase),
    Runtime(RuntimePhase),
}

Represents the “flavors” of MIR.

All flavors of MIR use the same data structure, but there are some important differences. These differences come in two forms: Dialects and phases.

Dialects represent a stronger distinction than phases. This is because the transitions between dialects are semantic changes, and therefore technically lowerings between distinct IRs. In other words, the same Body might be well-formed for multiple dialects, but have different semantic meaning and different behavior at runtime.

Each dialect additionally has a number of phases. However, phase changes never involve semantic changes. If some MIR is well-formed both before and after a phase change, it is also guaranteed that it has the same semantic meaning. In this sense, phase changes can only add additional restrictions on what MIR is well-formed.

When adding phases, remember to update MirPhase::phase_index.

Variants

Built

The MIR that is generated by MIR building.

The only things that operate on this dialect are unsafeck, the various MIR lints, and const qualifs.

This has no distinct phases.

Analysis(AnalysisPhase)

The MIR used for most analysis.

The only semantic change between analysis and built MIR is constant promotion. In built MIR, sequences of statements that would generally be subject to constant promotion are semantically constants, while in analysis MIR all constants are explicit.

The result of const promotion is available from the mir_promoted and promoted_mir queries.

This is the version of MIR used by borrowck and friends.

Runtime(RuntimePhase)

The MIR used for CTFE, optimizations, and codegen.

The semantic changes that occur in the lowering from analysis to runtime MIR are as follows:

• Drops: In analysis MIR, Drop terminators represent conditional drops; roughly speaking, if dataflow analysis determines that the place being dropped is uninitialized, the drop will not be executed. The exact semantics of this aren’t written down anywhere, which means they are essentially “what drop elaboration does.” In runtime MIR, the drops are unconditional; when a Drop terminator is reached, if the type has drop glue that drop glue is always executed. This may be UB if the underlying place is not initialized.
• Packed drops: Places might in general be misaligned - in most cases this is UB, the exception is fields of packed structs. In analysis MIR, Drop(P) for a P that might be misaligned for this reason implicitly moves P to a temporary before dropping. Runtime MIR has no such rules, and dropping a misaligned place is simply UB.
• Unwinding: in analysis MIR, unwinding from a function which may not unwind aborts. In runtime MIR, this is UB.
• Retags: If -Zmir-emit-retag is enabled, analysis MIR has “implicit” retags in the same way that Rust itself has them. Where exactly these are is generally subject to change, and so we don’t document this here. Runtime MIR has all retags explicit.
• Generator bodies: In analysis MIR, locals may actually be behind a pointer that user code has access to. This occurs in generator bodies. Such locals do not behave like other locals, because they eg may be aliased in surprising ways. Runtime MIR has no such special locals - all generator bodies are lowered and so all places that look like locals really are locals.

Also note that the lint pass which reports eg 200_u8 + 200_u8 as an error is run as a part of analysis to runtime MIR lowering. To ensure lints are reported reliably, this means that transformations which may suppress such errors should not run on analysis MIR.

Implementations

impl MirPhase

pub fn name(&self) -> &'static str

pub fn reveal(&self) -> Reveal

impl MirPhase

pub fn phase_index(&self) -> usize

Gets the index of the current MirPhase within the set of all MirPhases.

FIXME(JakobDegen): Return a (usize, usize) instead.

pub fn parse(dialect: String, phase: Option<String>) -> Self

Parses an MirPhase from a pair of strings. Panics if this isn’t possible for any reason.

Trait Implementations

impl Clone for MirPhase

fn clone(&self) -> MirPhase

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for MirPhase

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<'tcx, __D: TyDecoder<I = TyCtxt<'tcx>>> Decodable<__D> for MirPhase

fn decode(__decoder: &mut __D) -> Self

impl<'tcx, __E: TyEncoder<I = TyCtxt<'tcx>>> Encodable<__E> for MirPhase

fn encode(&self, __encoder: &mut __E)

impl<'__ctx> HashStable<StableHashingContext<'__ctx>> for MirPhase

fn hash_stable(
    &self,
    __hcx: &mut StableHashingContext<'__ctx>,
    __hasher: &mut StableHasher
)

impl<'tcx> Lift<'tcx> for MirPhase

type Lifted = MirPhase

fn lift_to_tcx(self, _: TyCtxt<'tcx>) -> Option<Self>

impl Ord for MirPhase

fn cmp(&self, other: &MirPhase) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Selfwhere
    Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Selfwhere
    Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Selfwhere
    Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval.

impl PartialEq<MirPhase> for MirPhase

fn eq(&self, other: &MirPhase) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<MirPhase> for MirPhase

fn partial_cmp(&self, other: &MirPhase) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'tcx> TypeFoldable<'tcx> for MirPhase

fn try_fold_with<F: FallibleTypeFolder<'tcx>>(
    self,
    _: &mut F
) -> Result<Self, F::Error>

The entry point for folding. To fold a value t with a folder f call: t.try_fold_with(f).

fn fold_with<F: TypeFolder<'tcx>>(self, _: &mut F) -> Self

A convenient alternative to try_fold_with for use with infallible folders. Do not override this method, to ensure coherence with try_fold_with.

impl<'tcx> TypeVisitable<'tcx> for MirPhase

fn visit_with<F: TypeVisitor<'tcx>>(&self, _: &mut F) -> ControlFlow<F::BreakTy>

The entry point for visiting. To visit a value t with a visitor v call: t.visit_with(v).

fn has_vars_bound_at_or_above(&self, binder: DebruijnIndex) -> bool

Returns true if self has any late-bound regions that are either bound by binder or bound by some binder outside of binder. If binder is ty::INNERMOST, this indicates whether there are any late-bound regions that appear free.

fn has_vars_bound_above(&self, binder: DebruijnIndex) -> bool

Returns true if this type has any regions that escape binder (and hence are not bound by it).

fn has_escaping_bound_vars(&self) -> bool

Return true if this type has regions that are not a part of the type. For example, for<'a> fn(&'a i32) return false, while fn(&'a i32) would return true. The latter can occur when traversing through the former.

fn has_type_flags(&self, flags: TypeFlags) -> bool

fn has_projections(&self) -> bool

fn has_opaque_types(&self) -> bool

fn references_error(&self) -> bool

fn error_reported(&self) -> Result<(), ErrorGuaranteed>

fn has_non_region_param(&self) -> bool

fn has_infer_regions(&self) -> bool

fn has_infer_types(&self) -> bool

fn has_non_region_infer(&self) -> bool

fn needs_infer(&self) -> bool

fn has_placeholders(&self) -> bool

fn needs_subst(&self) -> bool

fn has_free_regions(&self) -> bool

“Free” regions in this context means that it has any region that is not (a) erased or (b) late-bound.

fn has_erased_regions(&self) -> bool

fn has_erasable_regions(&self) -> bool

True if there are any un-erased free regions.

fn is_global(&self) -> bool

Indicates whether this value references only ‘global’ generic parameters that are the same regardless of what fn we are in. This is used for caching.

fn has_late_bound_regions(&self) -> bool

True if there are any late-bound regions

fn still_further_specializable(&self) -> bool

Indicates whether this value still has parameters/placeholders/inference variables which could be replaced later, in a way that would change the results of impl specialization.

impl Copy for MirPhase

impl Eq for MirPhase

impl StructuralEq for MirPhase

impl StructuralPartialEq for MirPhase

Layout

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference’s “Type Layout” chapter for details on type layout guarantees.

Size: 2 bytes

Size for each variant:

• Built: 0 bytes
• Analysis: 1 byte
• Runtime: 1 byte