Struct rustc_apfloat::ieee::IeeeFloat

pub struct IeeeFloat<S> {
    sig: [u128; 1],
    exp: ExpInt,
    category: Category,
    sign: bool,
    marker: PhantomData<S>,
}

Fields

sig: [u128; 1]

Absolute significand value (including the integer bit).

exp: ExpInt

The signed unbiased exponent of the value.

category: Category

What kind of floating point number this is.

sign: bool

Sign bit of the number.

marker: PhantomData<S>

Implementations

impl<S: Semantics> IeeeFloat<S>

fn overflow_result(round: Round) -> StatusAnd<Self>

Handle positive overflow. We either return infinity or the largest finite number. For negative overflow, negate the round argument before calling.

fn round_away_from_zero(&self, round: Round, loss: Loss, bit: usize) -> bool

Returns true if, when truncating the current number, with bit the new LSB, with the given lost fraction and rounding mode, the result would need to be rounded away from zero (i.e., by increasing the signficand). This routine must work for Category::Zero of both signs, and Category::Normal numbers.

fn normalize(self, round: Round, loss: Loss) -> StatusAnd<Self>

fn from_hexadecimal_string(
    s: &str,
    round: Round
) -> Result<StatusAnd<Self>, ParseError>

fn from_decimal_string(
    s: &str,
    round: Round
) -> Result<StatusAnd<Self>, ParseError>

Trait Implementations

impl<S> Add<IeeeFloat<S>> for IeeeFloat<S>where
    Self: Float,

type Output = StatusAnd<IeeeFloat<S>>

The resulting type after applying the + operator.

fn add(self, rhs: Self) -> StatusAnd<Self>

Performs the + operation.

impl<S> AddAssign<IeeeFloat<S>> for IeeeFloat<S>where
    Self: Float,

fn add_assign(&mut self, rhs: Self)

Performs the += operation.

impl<S> Clone for IeeeFloat<S>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<S: Semantics> Debug for IeeeFloat<S>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<S> Default for IeeeFloat<S>where
    Self: Float,

fn default() -> Self

Returns the “default value” for a type.

impl<S: Semantics> Display for IeeeFloat<S>

Prints this value as a decimal string.

\param precision The maximum number of digits of precision to output. If there are fewer digits available, zero padding will not be used unless the value is integral and small enough to be expressed in precision digits. 0 means to use the natural precision of the number. \param width The maximum number of zeros to consider inserting before falling back to scientific notation. 0 means to always use scientific notation.

\param alternate Indicate whether to remove the trailing zero in fraction part or not. Also setting this parameter to true forces producing of output more similar to default printf behavior. Specifically the lower e is used as exponent delimiter and exponent always contains no less than two digits.

Number precision width Result

---

1.01E+4 5 2 10100 1.01E+4 4 2 1.01E+4 1.01E+4 5 1 1.01E+4 1.01E-2 5 2 0.0101 1.01E-2 4 2 0.0101 1.01E-2 4 1 1.01E-2

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<S> Div<IeeeFloat<S>> for IeeeFloat<S>where
    Self: Float,

type Output = StatusAnd<IeeeFloat<S>>

The resulting type after applying the / operator.

fn div(self, rhs: Self) -> StatusAnd<Self>

Performs the / operation.

impl<S> DivAssign<IeeeFloat<S>> for IeeeFloat<S>where
    Self: Float,

fn div_assign(&mut self, rhs: Self)

Performs the /= operation.

impl<S: Semantics> Float for IeeeFloat<S>

const BITS: usize = S::BITS

Total number of bits in the in-memory format.

const PRECISION: usize = S::PRECISION

Number of bits in the significand. This includes the integer bit.

const MAX_EXP: ExpInt = S::MAX_EXP

The largest E such that 2^E is representable; this matches the definition of IEEE 754.

const MIN_EXP: ExpInt = S::MIN_EXP

The smallest E such that 2^E is a normalized number; this matches the definition of IEEE 754.

const ZERO: Self = _

Positive Zero.

const INFINITY: Self = _

Positive Infinity.

const NAN: Self = _

NaN (Not a Number).

fn qnan(payload: Option<u128>) -> Self

Factory for QNaN values.

fn snan(payload: Option<u128>) -> Self

Factory for SNaN values.

fn largest() -> Self

Largest finite number.

const SMALLEST: Self = _

Smallest (by magnitude) finite number. Might be denormalized, which implies a relative loss of precision.

fn smallest_normalized() -> Self

Smallest (by magnitude) normalized finite number.

fn add_r(self, rhs: Self, round: Round) -> StatusAnd<Self>

fn mul_r(self, rhs: Self, round: Round) -> StatusAnd<Self>

fn mul_add_r(
    self,
    multiplicand: Self,
    addend: Self,
    round: Round
) -> StatusAnd<Self>

fn div_r(self, rhs: Self, round: Round) -> StatusAnd<Self>

fn c_fmod(self, rhs: Self) -> StatusAnd<Self>

C fmod, or llvm frem.

fn round_to_integral(self, round: Round) -> StatusAnd<Self>

fn next_up(self) -> StatusAnd<Self>

IEEE-754R 2008 5.3.1: nextUp.

fn from_bits(input: u128) -> Self

fn from_u128_r(input: u128, round: Round) -> StatusAnd<Self>

fn from_str_r(s: &str, round: Round) -> Result<StatusAnd<Self>, ParseError>

fn to_bits(self) -> u128

fn to_u128_r(
    self,
    width: usize,
    round: Round,
    is_exact: &mut bool
) -> StatusAnd<u128>

fn cmp_abs_normal(self, rhs: Self) -> Ordering

fn bitwise_eq(self, rhs: Self) -> bool

Bitwise comparison for equality (QNaNs compare equal, 0!=-0).

fn is_negative(self) -> bool

IEEE-754R isSignMinus: Returns whether the current value is negative.

fn is_denormal(self) -> bool

IEEE-754R isSubnormal(): Returns whether the float is a denormal.

fn is_signaling(self) -> bool

Returns true if the float is a signaling NaN.

fn category(self) -> Category

fn get_exact_inverse(self) -> Option<Self>

If this value has an exact multiplicative inverse, return it.

fn ilogb(self) -> ExpInt

Returns the exponent of the internal representation of the Float.

fn scalbn_r(self, exp: ExpInt, round: Round) -> Self

Returns: self * 2^exp for integral exponents. Equivalent to C standard library function ldexp.

fn frexp_r(self, exp: &mut ExpInt, round: Round) -> Self

Equivalent to C standard library function with the same name.

fn sub_r(self, rhs: Self, round: Round) -> StatusAnd<Self>

fn mul_add(self, multiplicand: Self, addend: Self) -> StatusAnd<Self>

fn ieee_rem(self, rhs: Self) -> StatusAnd<Self>

IEEE remainder.

fn next_down(self) -> StatusAnd<Self>

IEEE-754R 2008 5.3.1: nextDown.

fn abs(self) -> Self

fn copy_sign(self, rhs: Self) -> Self

fn from_i128_r(input: i128, round: Round) -> StatusAnd<Self>

fn from_i128(input: i128) -> StatusAnd<Self>

fn from_u128(input: u128) -> StatusAnd<Self>

fn to_i128_r(
    self,
    width: usize,
    round: Round,
    is_exact: &mut bool
) -> StatusAnd<i128>

Converts a floating point number to an integer according to the rounding mode. In case of an invalid operation exception, deterministic values are returned, namely zero for NaNs and the minimal or maximal value respectively for underflow or overflow. If the rounded value is in range but the floating point number is not the exact integer, the C standard doesn’t require an inexact exception to be raised. IEEE-854 does require it so we do that.

fn to_i128(self, width: usize) -> StatusAnd<i128>

fn to_u128(self, width: usize) -> StatusAnd<u128>

fn min(self, other: Self) -> Self

Implements IEEE minNum semantics. Returns the smaller of the 2 arguments if both are not NaN. If either argument is a NaN, returns the other argument.

fn max(self, other: Self) -> Self

Implements IEEE maxNum semantics. Returns the larger of the 2 arguments if both are not NaN. If either argument is a NaN, returns the other argument.

fn is_normal(self) -> bool

IEEE-754R isNormal: Returns whether the current value is normal.

fn is_finite(self) -> bool

Returns true if the current value is zero, subnormal, or normal.

fn is_zero(self) -> bool

Returns true if the float is plus or minus zero.

fn is_infinite(self) -> bool

IEEE-754R isInfinite(): Returns whether the float is infinity.

fn is_nan(self) -> bool

Returns true if the float is a quiet or signaling NaN.

fn is_non_zero(self) -> bool

fn is_finite_non_zero(self) -> bool

fn is_pos_zero(self) -> bool

fn is_neg_zero(self) -> bool

fn is_smallest(self) -> bool

Returns true if the number has the smallest possible non-zero magnitude in the current semantics.

fn is_largest(self) -> bool

Returns true if the number has the largest possible finite magnitude in the current semantics.

fn is_integer(self) -> bool

Returns true if the number is an exact integer.

fn scalbn(self, exp: ExpInt) -> Self

fn frexp(self, exp: &mut ExpInt) -> Self

impl<S: Semantics, T: Semantics> FloatConvert<IeeeFloat<T>> for IeeeFloat<S>

fn convert_r(self, round: Round, loses_info: &mut bool) -> StatusAnd<IeeeFloat<T>>

Converts a value of one floating point type to another. The return value corresponds to the IEEE754 exceptions. *loses_info records whether the transformation lost information, i.e., whether converting the result back to the original type will produce the original value (this is almost the same as return value == Status::OK, but there are edge cases where this is not so).

fn convert(self, loses_info: &mut bool) -> StatusAnd<T>

impl<F: FloatConvert<Self>> From<DoubleFloat<F>> for IeeeFloat<FallbackS<F>>

fn from(DoubleFloat: DoubleFloat<F>) -> Self

Converts to this type from the input type.

impl<F> From<IeeeFloat<FallbackS<F>>> for DoubleFloat<F>where
    F: FloatConvert<IeeeFloat<FallbackExtendedS<F>>> + Float,
    IeeeFloat<FallbackExtendedS<F>>: FloatConvert<F>,

fn from(x: IeeeFloat<FallbackS<F>>) -> Self

Converts to this type from the input type.

impl<S> FromStr for IeeeFloat<S>where
    Self: Float,

type Err = ParseError

The associated error which can be returned from parsing.

fn from_str(s: &str) -> Result<Self, ParseError>

Parses a string s to return a value of this type.

impl<S> Mul<IeeeFloat<S>> for IeeeFloat<S>where
    Self: Float,

type Output = StatusAnd<IeeeFloat<S>>

The resulting type after applying the * operator.

fn mul(self, rhs: Self) -> StatusAnd<Self>

Performs the * operation.

impl<S> MulAssign<IeeeFloat<S>> for IeeeFloat<S>where
    Self: Float,

fn mul_assign(&mut self, rhs: Self)

Performs the *= operation.

impl<S> Neg for IeeeFloat<S>

type Output = IeeeFloat<S>

The resulting type after applying the - operator.

fn neg(self) -> Self

Performs the unary - operation.

impl<S: Semantics> PartialEq<IeeeFloat<S>> for IeeeFloat<S>

fn eq(&self, rhs: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<S: Semantics> PartialOrd<IeeeFloat<S>> for IeeeFloat<S>

fn partial_cmp(&self, rhs: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<S> Rem<IeeeFloat<S>> for IeeeFloat<S>where
    Self: Float,

type Output = StatusAnd<IeeeFloat<S>>

The resulting type after applying the % operator.

fn rem(self, rhs: Self) -> StatusAnd<Self>

Performs the % operation.

impl<S> RemAssign<IeeeFloat<S>> for IeeeFloat<S>where
    Self: Float,

fn rem_assign(&mut self, rhs: Self)

Performs the %= operation.

impl<S> Sub<IeeeFloat<S>> for IeeeFloat<S>where
    Self: Float,

type Output = StatusAnd<IeeeFloat<S>>

The resulting type after applying the - operator.

fn sub(self, rhs: Self) -> StatusAnd<Self>

Performs the - operation.

impl<S> SubAssign<IeeeFloat<S>> for IeeeFloat<S>where
    Self: Float,

fn sub_assign(&mut self, rhs: Self)

Performs the -= operation.

impl<S> Copy for IeeeFloat<S>

Layout

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference’s “Type Layout” chapter for details on type layout guarantees.

Size: 24 bytes